User manual PANASONIC SC-PM27

[. . . ] (Product numbers correct as of January 2009. These may be subject to change. ) 1 x Remote control Operations in these instructions are described using remote control, but you can do the operations with the main unit if the controls are the same. Your unit may not look exactly as illustrated. Table of contents Caution for AC mains lead. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · Do not use discs with labels and stickers that are coming off or with adhesive exuding from under labels and stickers. · Do not attach extra labels or stickers on the disc. · Do not write anything on the disc. Using DualDisc The "CD" sides of DualDisc do not meet the CD-DA standard so it may not be possible to play them on this unit. MP3 Files are treated as tracks and folders are treated as albums. · This unit can access up to 999 tracks, 255 albums and 20 sessions. · Files must have the extension: ". MP3" or ". mp3" · Disc must conform to ISO9660 level 1 or 2 (except for extended formats). · To play in a certain order, prefix the folder and file names with the 3-digit numbers in the order you want to play them. MP3 To cancel program mode check program contents replay the program Press [PROGRAM] then [CD q/h]. add to the program clear the last track clear all programmed tracks Note · When you try to program more than 24 tracks "PGM FULL" appears. · The program memory is cleared when you open the disc tray. CD · During program play, you can search backward or forward only within the current track. RQTX0215 ENGLISH 9 Using the FM/AM radio Manual tuning TUNE FM/AM MODE Memory preset Up to 30 stations can be set in the FM band and 15 stations in the AM band. FM/AM ENGLISH 1 2 3 Press [FM/AM] to select "FM" or "AM". Press [TUNE MODE] to select "MANUAL". Note The clock may lose or gain minutes over a period of time. Readjust as necessary. check the settings (when the unit is on or in standby mode) cancel PLAY Press [z, PLAY] to clear the timer indicators from the display. Using the play timer You can set the timer to come on at a certain time to wake you up. Preparation · Turn the unit on and set the clock. · Prepare the music source (disc, radio, USB or iPod source) and set the volume. 1 Press [CLOCK/TIMER] repeatedly to select play timer. CLOCK zPLAY Original display 2 Within 5 seconds, press [u/t] or [y/i] to set the starting time. Start time Note · The play timer will start at the preset time, with the volume increasing gradually to the preset level. · The timer comes on at the set time every day if the timer is on. · The unit must be in the standby mode for the timer to function. · If you turn the unit off and on again while a timer is functioning, the finish time setting will not be activated. Using the sleep timer This function enables you to turn off the unit automatically after the set time. Press [SLEEP] repeatedly to select your desired time. Play timer indicator 3 4 Press [CLOCK/TIMER] to confirm. Repeat steps 2 and 3 to set the finishing time. [. . . ] Total harmonic distortion is measured by the digital spectrum analyser. Maintenance If the surfaces are dirty To clean this unit, wipe with a soft, dry cloth. · Never use alcohol, paint thinner or benzine to clean this unit. · Before using chemically treated cloth, read the instructions that came with the cloth carefully. RQTX0215 17 ENGLISH CAUTION! ENGLISH THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. [. . . ]