User manual PANASONIC SC-PM500

[. . . ] SAFETY PRECAUTIONS Operating Instructions Placement Set the system up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the service life of the system. Place it at least 15 cm away from wall surfaces to avoid distortion and unwanted acoustical effects. Do not place heavy items on the system. SPECIFICATIONS Foreign matter Do not let metal objects fall inside the system. [. . . ] To check while programming, press [PROGRAM] two times after "PGM" is shown, then press [2] or [6]. Press [DEL] in the stop mode. 2 3 Within 10 seconds, press [R, T] to set the time. Press [OK]. To set the code to "REMOTE 2" 1 Press and hold [CD] on the main unit and [2] on the remote control until "REMOTE 2" is shown. 2 2 Press and hold [OK] and [2] for a minimum of 4 seconds. 2 Press and hold [OK] and [1] for a minimum of 4 seconds. Stop playback Pause playback Skip album Skip track Press [CLOCK/TIMER] to show the clock for a few seconds. Note: Reset the clock regularly to maintain accuracy. 2 3 4 5 6 Within 10 seconds, press [R, T] to set the start time. Do steps 2 and 3 again to set the end time. 13 MAINTENANCE Sleep timer The sleep timer switches off the system after the set time. Press [SLEEP] to select the setting (in minutes). 30 MIN 60 MIN OFF 90 MIN 120 MIN To start the timer Press [#, PLAY] to start "#PLAY 1", "#PLAY 2" or "#PLAY 3". The system must be switched off for the timer to operate. Do steps 1 through 4 and 6 again (Z above). 1) Press [#, PLAY] two times to remove the timer indicator on the display panel. Press [CLOCK/TIMER] to select "#PLAY 1", "#PLAY 2" or "#PLAY 3". Press [#, PLAY] two times to remove the timer indicator on the display panel. To clean this system, wipe with a soft, dry cloth. · Never use alcohol, paint thinner or benzine to clean this system. · Before using chemically treated cloth, read the instructions that came with the cloth carefully. Search Press and hold [3] or [5] through track (main unit: [2/3] or [5/6]). 14 TROUBLESHOOTING GUIDE Repeat playback You can repeat "Program playback" or other selected "Playmode function". 1 Press [PLAY MENU] to select "REPEAT". 2 Press [Y, U] to select "ON REPEAT" and then press [OK]. To cancel, select "OFF REPEAT". Cancel program mode Replay the program Check program contents 7 1 2 To show the remaining time Press [SLEEP]. RADIO 1 2 3 Press [OK] to select "LOWEST" or "CURRENT" frequency. Press [RADIO MENU] to select "A. PRESET" and then press [OK]. Press [OK] to start presetting. Change the settings Change the source or volume Check the settings Cancel Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated do not solve the problem, consult your dealer for instructions. Manual tuning Press [RADIO, EXT-IN] (main unit: [RADIO/EXT-IN(USB)]) to select "FM". Press [3] or [5] to select the frequency of the required station. To tune automatically, press and hold the button until the frequency starts changing quickly. Note: · The sleep timer can be used together with the play timer. · The sleep timer always comes first. [. . . ] Press [4/9] to continue playback from the start of the track. OR Press [8] two times to stop the playback fully. Stop playback Connecting to headphones Connect the headphones to the headphones jack. Plug type: Ø 3. 5 mm stereo (not included) · Avoid listening for prolonged periods of time to prevent hearing damage. · Excessive sound pressure from earphones and headphones can cause hearing loss. [. . . ]