User manual PANASONIC SC-AK250

[. . . ] Operating Instructions CD Stereo System Model No. The illustrations show SC-AK350. SC-AK350 SC-AK250 Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. These operating instructions are applicable to the following systems. AK350 : indicates features applicable to SC-AK350 only. [. . . ] · Do not use disc with labels and stickers that are coming off or with adhesive exuding from under labels and stickers. · Do not attach extra labels or stickers on the disc. · Do not write anything on the disc. Using DualDiscs The "CD" sides of DualDiscs do not meet the CD-DA standard so it may not be possible to play them on this unit. NOTE on MP3 · Files are treated as tracks and folders are treated as albums. · This unit can access up to 999 tracks, 255 albums and 20 sessions. · Disc must conform to ISO9660 level 1 or 2 (except for extended formats). · To play in a certain order, prefix the folder and file names with 3-digits numbers in the order you want to play them. When "NOT MP3/ERROR1" appears on the display, an unsupported MP3 format is being played. The unit will skip that track and play the next one. Limitations on MP3 play · If you have recorded MP3 on the same disc as CD-DA, only the format recorded in the first session can be played. · Some MP3s may not be played due to the condition of the disc or recording. · Recordings will not necessarily be played in the order you recorded them. · Some characters may not be displayed correctly due to the recording format/software used. RQT8043 RQTV0196 11 LANG - 5 LANG - 4 FRANÇAIS DANSK Blinks to indicate track title search mode DEUTSCH Press [ENTER]. Press [4, / REW] or [¢, / FF] to search for previous or next match. Album title search Cassette tape ­ Play and record The buttons described for "Cassette tape ­ Play and record" are mainly for the main unit unless indicated otherwise. 2 ESPAÑOL TAPE Basic play Use normal position tapes. High position and metal position tapes can be played, but the unit will not be able to identify the characteristics of these tapes. Select the source to be recorded. Radio recording: Tune in the station . (\ page 13) Disc recording: Insert the disc(s) you want to record. Prepare the desired disc recording mode. To record programmed tracks Action Perform steps 2 to 4 in "Program play" (\ page 10). Perform steps 3 to 6 in "Program play" (\ page 10). By remote control only record specific discs/tracks 1) Press [DISC] and then [1] ~ [5] to select the disc. 2) Press [PLAY MODE] to select the desired mode (\ page 9). 3) For 1-ALBUM mode and 1-TRACK mode: or )] to select the Press [ALBUM ( album. For 1-TRACK mode: Press [4, / REW] or [¢, select the track. 1 2 DANSK 3 To Press [3, TAPE]. If a cassette was loaded, play starts automatically (One touch play). Press [0, OPEN] and insert the cassette. [. . . ] ( The USB host function of this product may not work with some USB devices. USB devices with storage capacity of more than 8 gigabytes may not work in some instances. Large file size or high memory USB flash drive takes longer time to read. The USB mass storage device rating exceeds 500mA. [. . . ]