User manual PANASONIC SC-AK78

[. . . ] CD Stereo System Operating Instructions Model No. SC-AK78 Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. RQT5289-1P Table of contents Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. These operating instructions are applicable to the following system. Before use Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press [CD]. Ensure CD is stopped. SUPER SIMULATED S. WOOFER PRO LOGIC SURROUND STEREO 2. Press [PROGRAM]. 2 CANCEL PROGRAM CANCEL REPEAT RANDOM AUX1/2 6 CH TAPE TUNER CD TEST VOLUME 1 6 3. (Within 10 seconds or so) Press [1] ­ [5] to select the disc you want. Press the numeric button to select the desired track. Repeat steps 3 ­ 5 until you have programmed the desired track(s). 1 2 3 4 Specified disc number 6. Press [ ]. Play will start in the programmed sequence. To cancel program play mode Press [PROGRAM] in the stop mode. Programmed contents will be saved in memory. Pressing [ ] will cancel program play, but it will also erase the entire program. To select a two-digit track Press [10] and then the two numbers you want. When "CD FULL" appears The number of programmed tracks is limited to 24. You can do the following during program mode · Check program contents. Every time you press one of the buttons, the track and program No. From the last programmed track A specified track only Press [CANCEL]. Select the track with [ ] or [ ], and press [CANCEL] within 3 seconds. Press [ ]. 5 Specified track number Program order 6 All tracks Memory retention Your program is retained in memory for about 2 weeks while the system is unplugged. To replay your program If you turned off your program with [PROGRAM], you can play it again as explained below. Press [ If you program a track number not on your CDs The track is initially programmed, but during program play, the player will skip that track and will continue playing from the next programmed item. Indicates program mode 19 RQT5289 CD operation 2 1 3 Listening to compact discs To listen to special CDs and tracks (CD Manager function) 4 5 This function makes it easier for you to select specific CDs and tracks from amongst those loaded in the player. You can use this function to make recordings as well. · For playing back 1 track only from all loaded CDs 1-Track mode (1-TRACK) · For playing back 1 CD only from all loaded CDs 1-Disc mode (1-DISC) · For playing back 1 track on all loaded CDs 1-Track All-Disc mode (1-ALL) 1 2 CD operation 1. Press [CD]. Ensure CD is stopped. 2. Press [CD MANAGER] to select the desired mode. Every time you press the button; 1-TRACK 1-DISC 1-ALL NORMAL (OFF) 1-TRACK: Only one particular track is played. 1-DISC: The tracks on only one particular disc are played. [. . . ] "TAKE OUT DISC" appears on the display. There is a problem with the CD mechanism. (A power failure may have occurred. ) Replace the disc with a different one. Wait for 60 minutes before using the CDs. [. . . ]