User manual PANASONIC SC-AKX38EB

[. . . ] These operating instructions are applicable to the following system. Unless otherwise indicated, illustrations in these operating instructions are of SC-AK520 for South Africa and Middle East. System Main unit Front speakers Subwoofer SC-AK520 SA-AK520 SB-AK520 SB-WAK520 SC-AKX38EB SA-AK320 SB-AK320 ­ Caution for AC Mains Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press [g/REW/3] or [f/FF/4] repeatedly to tune step-by-step. "TUNED" is displayed when a radio station is tuned. "ST" is displayed when a stereo FM broadcast is being received. Automatic presetting Do the following once each for FM and AM. Preparation: Tune to the frequency where pre-setting is to begin. Hold down [PROGRAM] until the frequency changes. The tuner presets all the stations it can receive into the channels in ascending order. When finished, the last station memorized is tuned in. AK520 AK320 If noise is excessive in FM Remote control only Hold down [PLAY MODE] to display "MONO". Monaural sound is selected and noise reduces when reception is weak. Hold down [PLAY MODE] again to cancel the mode. "MONO" is also cancelled if the frequency is changed. RDS broadcasting (For areas except Russia, Ukraine, Australia, New Zealand, South Africa and Middle East) Manual presetting Pre-set the stations one at a time. 1 Press [PROGRAM] then press [g, REW/3 ] or [f, 4/FF] to tune to the desired station. 2 Press [PROGRAM] then press [g, REW/3 ] or [f, 4/FF] to select a channel. The station occupying a channel is erased if another station is preset in that channel. Remote control only This unit can display the text data transmitted by the radio data system (RDS) available in some areas. If the station you are listening to is transmitting RDS signals, "RDS" will light up on the display. Displaying the name of a broadcasting station or a program type Press [CD/RDS DISP]. Play starts from the selected track. 4 Only when you selected "A-RANDOM" in step 1 Press [:/J, CD] to start play. To stop play Press [L, CLEAR]. When playback ends The current play mode will be retained in memory until it is changed even if the unit is turned off. Final disc For example, if play starts from disc 4, disc 3 will be the "final disc". Order of progression: Disc 4z5z1z2z3 10 RQT7336 To skip forward/ backward · · Note You can use repeat mode with CD Play Mode function. You cannot use program mode together with CD Play Mode function. CDs Starting play from a specific track Remote control only How discs with MP3 differ from CDs CD Play Mode function for MP3 Remote control only Preparation: Press [:/J, CD] and then [L, CLEAR]. 1 Press [DISC] and (within 10 seconds) [1]­[5] to select the disc. 2 Select the track with the numbered buttons. To select track 10 or over, press [X10] then the two digits. Note You cannot use this function with 1-RANDOM or A-RANDOM mode. 1 Press [PLAY MODE] to select the desired mode. Every time you press the button: ALL-DISC 1-SONG 1-ALBUM 1-DISC ALL-DISC: Program play You can program up to 24 tracks. Remote control only Preparation: Press [:/J, CD] and then [L, CLEAR]. :J Plays all loaded discs in succession from the selected disc to the final disc . 1-SONG: Plays one selected track on the selected disc. 1-ALBUM: Plays one selected album on the selected disc. (The original display is restored in about 2 seconds. ) 2 Press [DISC] and (within 10 seconds) [1]­[5] to select the disc. The CD starts. 1 Press [PROGRAM]. "PGM" appears. 2 Press [DISC] and (within 10 seconds) [1]­[5] to select the disc. 3 When you selected "1-ALBUM" or "1-SONG" in step 1 Press [ALBUM ( or )] to select the album. Play starts from the first track of the selected album. 3 Select the tracks with the numbered buttons. To select track 10 or over, press [X10] then the two digits. Repeat steps 2 and 3 to program other tracks. 4 When you selected "1-SONG" in step 1 4 Press [:/J, CD] to start play. To exit program mode Press [PROGRAM] in the stop mode. [. . . ] The location and orientation of the antenna are incorrect. If you are using an indoor antenna, change to an outdoor antenna. The TV antenna wire is too close to the unit. Separate the antenna wire of the TV set from the unit. Using the cassette deck Poor quality sound. [. . . ]