User manual PANASONIC SC-AP01GN

[. . . ] SC-AP01EBGN~RQT9658-2B. book Page 1 Friday, June 15, 2012 10:44 AM Operating Instructions Compact Stereo System Model No. SC-AP01 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference. Model number suffix “EB” denotes UK models. EB GN RQT9658-2B until 2012/03/09 Reference Operations Network settings Getting started SC-AP01EBGN~RQT9658. book Page 2 Thursday, March 22, 2012 5:11 PM Caution for AC Mains Lead (For the United Kingdom and Ireland) For your safety, please read the following text carefully. [. . . ] 3 Type the password into the “Password” field and then select “NEXT”. Additional settings After step 5 and before step 6: If your home wireless network has been setup to use specific IP Addresses, Subnet Mask, Default Gateway, Primary DNS, etc. Select “Advanced network settings”. {. Input the required addresses into each field and ≥ Enable Java and Cookies in your browser settings. ≥ This unit can also be set using the WPS PIN code. Replace step 2 of “Method 1” with the following steps. (Before starting, refer to the wireless network router’s operating instructions for details on how to enter the PIN code. ) 1 While the Wi-Fi® status indicator blinks blue, press and hold [– WPS] again. The Wi-Fi® status indicator blinks purple. 2 Enter the PIN code “64428147” into the wireless router. select “OK”. ≥ To change the settings back to DHCP, select “ON” from the “DHCP” drop down list. If you want to change the name of this unit. Select “Edit STEREO SYSTEM name”. {. Type a new name into the “STEREO SYSTEM name” field and select “OK”. 8 RQT9658 SC-AP01EBGN~RQT9658. book Page 9 Thursday, March 22, 2012 5:11 PM Using AirPlay with this unit’s speakers Preparation ≥ Complete the network settings. ( 6) ≥ Connect the iOS device or Mac/PC to the same home wireless network as this unit. 3 Select “Panasonic AP01 _ _ _ _ _ _”*1, 2 from the AirPlay icon at the bottom right-hand corner of the display. {. Check the volume settings before starting the 1 Turn the unit on. ≥ Check that the Wi-Fi status indicator lights blue. ® playback. (When AirPlay is used for the first time, the volume may be output at the maximum setting. ) e. g. , iPhone iOS 5. 0 (When held vertically) Blinks red Lights blue ≥ If it continues to blink red, check the wireless network settings. ( 6) e. g. , iTunes 10. 5 (Bottom right) Computer Panasonic AP01 _ _ _ _ _ _ 2 iOS device: Start the “Music” (or iPod) app. Mac/PC: Start “iTunes”. ≥ If the Music app on your iOS device is used, select the audio file you want to play. 4 Start play. ≥ The playback will start with a slight delay. ≥ This unit can be set to turn on automatically when this unit is selected as the output speakers. ( 11) ≥ Volume changes on the iOS device or iTunes will be applied to this unit. (Refer to the iTunes Help for the required settings in iTunes. ) ≥ With some iOS and iTunes versions, it may not be possible to restart the AirPlay playback if the unit is turned off during the AirPlay playback. In this case, select a different device from the AirPlay icon of the Music app or iTunes and then re-select this unit as the output speakers. ≥ AirPlay will not work when playing back videos on iTunes. ≥ If the AirPlay icon is not displayed even if Wi-Fi® status indicator lights blue, try restarting the wireless network router. [. . . ] ≥ If play does not start (even though the Wi-Fi® status indicator lights blue and the AirPlay icon is displayed), restart the wireless network router, turn the Wi-Fi® connection on the iOS device or Mac/PC off and on, and then make sure that your home wireless network is selected. ≥ The unit has been left unused for about 30 minutes and will shut down in a minute. ( 11) The device connected to the USB port is not charging. ≥ Is this unit turned on?( 4) Even if the charge is not complete, charging will stop if the automatic standby is activated. Set “AUTO OFF” to “OFF” for continuous charging. [. . . ]