User manual PANASONIC SC-BT205

[. . . ] Operating Instructions Blu-ray Disc Home Theater Sound System Model No. SC-BT205 SC-BT200 Front speakers and surround speakers SC-BT205 SC-BT200 Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. [. . . ] It may take longer or the Internet may not be connected depending on the NOTE connection environment. It is required that you use a broadband connection. If downloading on this unit fails or this unit is not connected to the Internet, then you can download the latest firmware from the following website and TIPS burn it to a CD-R to update the firmware. http://panasonic. net/support/ (This site is in English only. ) When the unit is connected to the Internet, communication charges may be generated. If you do not want to check for the latest firmware version when the unit is turned on, set "Automatic Update Check" to "Off". ( 40) Manually updating the firmware If the firmware update is not carried out when the unit is turned on, a message is displayed when displaying the START menu. The latest firmware is available. Please update firmware in Setup. Yes No If "Yes" is selected, then follow the on-screen instructions. If "No" is selected, then manually update the firmware later. ( right) After the latest firmware is downloaded, the system will be restarted and the firmware will be updated. When the system is restarted, the screen display disappears and "START" is displayed on the unit's display. After the firmware is updated and the system is restarted, the following screen indicates that the firmware update has been completed. The firmware has been updated. Current Installed Version: x. x OK RETURN RQT9445 32 During the update process, no other operations can be performed. Serious damage may occur if you turn off the unit and/or press any buttons. 1) Press [SETUP]. 2) Press [3, 4] to select "General" and press [OK]. 3) Press [3, 4] to select "Firmware Update" and press [OK]. 4) Press [3, 4] to select "Update Now" and press [OK]. 5) Press [2, 1] to select "Yes" and press [OK]. Network settings These settings are used if you will connect this unit to the Internet. The connection to the Internet may take time or the Internet may not be connected depending on the connection environment. ( 40) It is required that you use a broadband connection. Preparation Connect to a broadband network. ( 13) Setting the IP address In most cases, default settings can normally be used without making any changes. Set the IP address only when the router has no DHCP server functions or when the router's DHCP server function is disabled. After performing steps 1­4 ( Testing of "IP Address / DNS Settings" Always test the connection when a LAN cable is connected. [. . . ] TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS. DO NOT OBSTRUCT THE UNIT'S VENTILATION OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS. DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED CANDLES, ON THE UNIT. DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY MANNER. [. . . ]