User manual PANASONIC SCBT222

[. . . ] Operating Instructions Blu-ray Disc Home Theater Sound System Model No. SC-BT222 Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. [. . . ] DIGITAL IN 1/DIGITAL IN 2 Press [AUDIO]. M1 M2 M1rM2 (stereo audio) (Only works with Dolby Dual Mono) "M1" or "M2" is not available if "On" is selected in "Digital Audio Input". ( 32) Press [SURROUND] several times to select the effect. For more detailed information on this operation, please refer to the "Enjoying surround sound effects" section on page 19. Sound modes You can adjust the mode depending on the source or situation. DIGITAL IN 2 Press [STATUS]. CABLE/SAT AUDIO Select when an HDMI connected STB is selected on the TV, "D-IN 2" input is automatically selected. ( 26, "Setting the audio link with the STB"). Audio that is input through the DIGITAL AUDIO IN or AUX terminals are not output from the HDMI AV OUT terminal. 1 2 While the selected mode is displayed on the unit's display Press [2, 1] and select the desired setting. For more detailed information on this operation, please refer to the "Changing the sound modes" section on page 19. VQT2S28 25 TV Press [SOUND] several times to select the mode. Radio Linked operations with the TV (VIERA Link "HDAVI ControlTM") What is VIERA Link "HDAVI Control"? VIERA Link "HDAVI Control" is a convenient function that offers linked operations of this unit, and a Panasonic TV (VIERA) under "HDAVI Control". You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment for operational details. One touch play You can turn on this unit and the TV, and start play with a single press of a button. While the unit and the TV are in standby mode; Press [1 PLAY]. Speaker Selection You can select whether audio is output from the unit's speakers or the TV speakers by using the TV menu settings. Home Cinema This unit's speakers are active. When this unit is in standby mode, changing the TV speakers to this unit's speakers in the TV menu will automatically turn the unit on and select, "AUX"*1, "ARC"*1 or "D-IN 1" (DIGITAL IN 1)*1 as the source. You can control the volume setting using the volume or mute button on the TV's remote control. If you turn off this unit, TV speakers will be automatically activated. Preparation 1 Set "VIERA Link" to "On" ( 34). (The default setting is "On". ) 2 Set the "HDAVI Control" operations on the connected equipment (e. g. , TV). 3 Turn on all "HDAVI Control" compatible equipment and select this unit's input channel on the connected TV so that the "HDAVI Control" function works properly. Also when the connection or settings are changed, repeat this procedure. TV TV speakers are active. The volume of this unit is set to "0". Audio output is 2-channel audio. When switching between this unit's speakers and TV speakers, the TV screen may be blank for several seconds. Setting the audio link Setting the audio link with the TV With the remote control; Select the actual TV audio connection on the main unit. 1 Press [START] and press [3, 4] to select "To Others" and press [OK]. 2 Press [3, 4] to select "Setup" and press [OK]. 3 Press [3, 4] to select "TV / Device Connection" and press [OK]. 4 Press [3, 4] to select "TV Audio Input". 5 Press [2, 1] to switch "AUX", "ARC" or "DIGITAL IN 1". Whenever the connection or settings are changed, reconfirm the points above. Setting the audio link with the STB With the remote control; Select the STB input channel on the TV. [. . . ] This product incorporates copyright protection technology that is protected by U. S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. [. . . ]