User manual PANASONIC SC-BTT105EB

[. . . ] Verify the type of speaker with the label on the rear of the speaker. [. . . ] Speakers Front speakers FRONT/AVANT CENTER/CENTRE SURROUND/AMBIOPHONIE C Centre speaker Surround speakers e. g. , L Place the speakers RED STEP 1 WHITE Label each speaker cable by attaching the numbered sticker at the position indicated in the illustration. Be sure to match the number on each sticker with the circled number in the illustration. e. g. , Front speaker Lch R GREEN PURPLE SW FRONT Lch 1 Subwoofer Centre speaker Front speakers Rch Lch WHITE Surround speakers BLUE GREY WHITE speaker Rch GREY Lch BLUE LS RS STEP 2 Connect the speaker cables. Insert the wire fully, taking care not to insert beyond the wire insulation. If your TV does not support the above, use the audio cable. Broadband router, etc. TV OPTICAL OUT Optical digital audio cable (not supplied) Video cable*1 (supplied only for Australia and New Zealand. ) *1 Make sure that the video cable connection is made to view photos/videos from the iPod/iPhone. Audio cable (not supplied) VIDEO IN L Internet AUDIO OUT R 4 1 Turn on the main unit Connect the AC mains lead Connect the AC mains lead to the main unit before connecting to the household mains socket. Main unit 2 Turn on the TV 3 Turn on the main unit 4 The Easy setup starts Turn on your TV and select the appropriate video input mode (e. g. , VIDEO 1, AV 1, HDMI, etc. ) to suit the connections to this unit. Press [ ] to turn on the main unit. The on screen display will guide you through the steps. Easy setup Would you like to start easy setup? Yes No AC mains lead (supplied) Installing batteries in the remote control R6/LR6, AA OK RETURN Press [, ] to select [Yes] and press [OK]. To a household mains socket [. . . ] Audio cable (not supplied) VIDEO IN L Internet AUDIO OUT R 4 1 Turn on the main unit Connect the AC mains lead Connect the AC mains lead to the main unit before connecting to the household mains socket. [. . . ]