User manual PANASONIC SC-BTT270EP

[. . . ] Easy Setting Guide The order of setting Blu-ray DiscTM Home Theater Sound System Model No. SC-BTT270 1 1 Prepare the speakers See below 2 Place the speakers See below 3 Connect the cables See over 4 Turn on the main unit See over Easy setup See Easy setup screen Prepare the speakers 2 Refer to the rear label of the speaker before connecting the corresponding cable. [. . . ] : White : Blue line PURPLE GREEN RED Recommended Front speakers (L, R) Surround speakers (LS, RS) White 60 PUSH! Blue line 120 VQC8267 F0111SB0 3 Connect the cables GREEN RED WHITE GREY It is possible to play back 3D videos and 3D still pictures by connecting this unit with a 3D compatible TV. For detailed information, refer to the operating instructions. Other connection Broadband Network Connections By connecting this unit to the network, you can optimise the internet features of this unit. · Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices. · When using the wireless LAN function, the LAN cable that connected to the main unit is not necessary. Connect the cables by colour or by the numbers indicated in the illustration to the appropriate terminals on the rear panel of the unit. BLUE FM indoor antenna (supplied) Adhesive tape PURPLE LAN Main unit 3 6 SUBWOOFER CENTER FRONT SURROUND 3 5 2 1 R 3 L 4 3 R 3 L FM ANT 75 AUX LAN cable (not supplied) Main unit HDMI (ARC) HDMI cable (not supplied) (Recommended for highest quality picture) HDMI If the HDMI terminal is labeled "HDMI (ARC)", you can enjoy TV sound and pictures with a single HDMI cable. If the HDMI terminal is not labeled "HDMI (ARC)", an "Audio cable" or "Optical digital audio cable" is required to listen to sound from the TV. Audio connection For best quality audio, use the HDMI cable (with an ARC compatible TV) or an optical digital audio cable. [. . . ] Main unit 2 Turn on the TV 3 Turn on the main unit 4 The Easy setup starts Turn on your TV and select the appropriate video input mode (e. g. , VIDEO 1, AV 1, HDMI, etc. ) to suit the connections to this unit. Press [ ] to turn on the main unit. The on screen display will guide you through the steps. Easy setup Would you like to start easy setup? Yes No AC mains lead (supplied) Installing batteries in the remote control R6/LR6, AA OK RETURN Press [, ] to select [Yes] and press [OK]. To a household mains socket [. . . ]