User manual PANASONIC SC-BTT465GA

[. . . ] Please keep this manual for future reference. To update the firmware of this unit, refer to page 32. Note: "EB" on the outer packaging indicates the United Kingdom. Region management information BD-Video This unit plays BD-Video marked with labels containing the region code B. Example: DVD-Video Example: This unit plays DVD-Video marked with labels containing the region number "2" or "ALL". 2 EB ALL 1 2 4 RQT9445-2B These operating instructions are applicable to models SC-BT200 and SC-BTT465GA. [. . . ] The Service through Network Service is operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services. All features of websites or content of the service may not be available. Some content may be inappropriate for some viewers and may only be available for specific countries and may be presented in specific languages. You may disable the Network Service feature by following the instructions found in your Operating Instructions. It's recommanded your player/recorder is connected to Full HD display with HDMI. The display of the contents may be truncated, depending on your TV. You may reduce to screen size by following the instructions found in your Operating Instructions. Don't show this message again ENTER New York, NY Weather NNW7 mph TM Featured Videos Panasonic Select Advanced operations Firmware updating When this unit remains connected to the Internet, it will automatically check for the latest firmware version when it is turned on. When latest firmware version is available, the following screen is displayed. Select "Yes" or "No". Firmware Update The latest firmware is available. Set the IP address only when the router has no DHCP server functions or when the router's DHCP server function is disabled. After performing steps 1­4 ( Testing of "IP Address / DNS Settings" Always test the connection when a LAN cable is connected. 1 While stopped Press [BD/SD] to select "BD/DVD". 3 Press [3, 4] to select "Network Settings" and press [OK]. 4 Press [3, 4] to select "IP Address / DNS Settings" and press [OK]. 5 Press [3, 4] to select "Connection Test" and press [OK]. IP Address/ DNS Settings Connection Test IP Address Auto-Assignment IP Address Subnet Mask Gateway Address DNS-IP Auto-Assignment Primary DNS Secondary DNS Connection Speed Auto-Config Connection Speed Setting OK RETURN On 5 Press [3, 4] to select "IP Address Auto-Assignment" and press [2, 1] to select "Off". 6 Press [3, 4] to select "IP Address", "Subnet Mask" or "Gateway Address" and press [OK]. 7 Enter numbers with the numbered buttons and press [OK]. After checking the specifications for your broadband router, enter each number. If the number is unknown, then check the number of other devices such as personal computers connected via a LAN cable. Assign a different number from those of other devices for the "IP Address" and the same number for others. If a wrong number is entered, then press [CANCEL]. [. . . ] *7 AVCHD format V1. 0 *8 The total combined maximum number of recognizable file contents and folders: 200 file contents and 300 folders. RQT9445 Reference 58 CAUTION!USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. [. . . ]