User manual PANASONIC SC-BTT466P

[. . . ] Please keep this manual for future reference. If you have any questions contact As an ENERGY STAR Partner, Panasonic has determined that ® this product meets the ENERGY STAR guidelines for energy efficiency. For Canada only: The word "Participant" is used in place of the word "Partner". ® [U. S. A. ]and]Puerto]Rico]: 1-800-211-PANA(7262) [Canada]: 1-800-561-5505 [Only]for[U. S. A. ]and]Puerto]Rico]: The warranty can be found on page 50. Please return the product registration card (if included), or register via the Internet at: www. panasonic. com/register [Canada]: The warranty can be found on page 51. P PC VQT2M13-2 Getting started CAUTION! THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. [. . . ] Tuning stops when a station is found. FM frequency step Main unit: The factory setting is set to 0. 2 MHz, it can be changed to receive broadcasts allocated in 0. 1 MHz. You may need to change this setting if the tuner seems to skip over the correct frequency for stations in your area. 1 Press [SELECTOR] to select "FM". After a few seconds the display changes to show the current lowest frequency. The lowest frequency changes and the step is changed. To return to the original settings, repeat steps 1 and 2. After changing the setting, previously preset frequencies will be cleared. Preset them again. 1 2 While listening to the radio broadcast Press [OK]. While "P" is flashing on the display Press the numbered buttons to select a channel. To select a 1-digit number e. g. , 1: [1] [OK]. To select a 2-digit number e. g. , 12: [1] [2] A station previously stored is overwritten when another station is stored in the same channel preset. VQT2M13 29 Radio Playback 1 2 Press [RADIO] to select "FM". Press [STATUS] to select the position to start the auto preset search. TV Enjoying TV with unit's speakers Preparation Turn on your TV and select the appropriate audio input mode [AUX, ARC, D-IN 1 or D-IN 2] to suit the connections to this unit. ( 23) Making settings for digital audio input Select to suit the type of audio from the DIGITAL AUDIO IN terminals on the main unit. Press [EXT-IN] several times to select "D-IN 1" (DIGITAL IN 1) or "D-IN 2" (DIGITAL IN 2). DIGITAL IN 1/DIGITAL IN 2 Press [AUDIO]. jWhen play starts on the unit jWhen an action that uses the display screen is performed (e. g. , Direct Navigator screen) When you switch the TV input to TV tuner mode, this unit will automatically switch to "AUX"*1, "ARC"*1 or "D-IN 1" (DIGITAL IN 1)*1 or "D-IN 2" (DIGITAL IN 2)*2. This function does not work when the iPod/iPhone selector is chosen. ( 33) Setting the audio link with the STB With the remote control; Select the STB input channel on the TV. 1 Press [EXT-IN] to select "D-IN 2". 2 Press [STATUS] to select "CABLE/SAT AUDIO ON". If the input channel of the STB on the TV is changed or if you want to change the device allocated for the linked operations, select "CABLE/SAT AUDIO OFF" in step 2 above and then repeat steps 1 to 2. Automatic lip-sync function (for HDAVI Control 3 or later) Delay between audio and video is automatically adjusted, enabling you to enjoy smooth audio for the picture ( 37, "Audio Delay"). This function works only when "BD/DVD", "SD", "AUX"*1, "ARC"*1, "D-IN 1" (DIGITAL IN 1)*1 or "D-IN 2" (DIGITAL IN 2)*2 is selected as the source on this unit. *1 "AUX", "ARC" or "D-IN 1" works depending on the setting in "Setting the audio link with the TV". *2 "D-IN 2" works depending on the setting in "Setting the audio link with the STB". VIERA Link "HDAVI Control", based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers' equipment that supports HDMI CEC cannot be guaranteed. This unit supports "HDAVI Control 5" function. [. . . ] If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantor's Consumer Affairs Department at the addresses listed for the warrantor. PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY. DVD Player, Portable DVD Player 1 year During the "Labor" warranty period there will be no charge for labor. During the "Parts" warranty period, there will be no charge for parts. [. . . ]