User manual PANASONIC SC-BTT755

[. . . ] Operating Instructions Blu-ray Disc Home Theater Sound System Model No. SC-BTT755 SC-BTT350 The illustration shows the image of SC-BTT755 for Australia and New Zealand. Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. [. . . ] You can control the volume setting using the volume or mute button on the TV's remote control. If you turn off this unit, TV speakers will be automatically activated. Preparation 1 Set "VIERA Link" to "On" ( 41). (The default setting is "On". ) 2 Set the "HDAVI Control" operations on the connected equipment (e. g. , TV). 3 Turn on all "HDAVI Control" compatible equipment and select this unit's input channel on the connected TV so that the "HDAVI Control" function works properly. Also when the connection or settings are changed, repeat this procedure. TV TV speakers are active. The volume of this unit is set to "0". Audio output is 2-channel audio. When switching between this unit's speakers and TV speakers, the TV screen may be blank for several seconds. The audio from "AUX", "DIGITAL IN", "FM Radio" or "iPod" will be output from this unit's speakers even though the TV speakers are selected. Setting the audio link Setting the audio link with the TV With the remote control; Select the actual TV audio connection on the main unit. 1 Press [START] and press [3, 4] to select "To Others" and press [OK]. 2 Press [3, 4] to select "Setup" and press [OK]. 3 Press [3, 4] to select "TV / Device Connection" and press [OK]. 4 Press [3, 4] to select "TV Audio Input". 5 Press [2, 1] to switch "AUX", "ARC" or "DIGITAL IN". Select "AUX" or "ARC"*1 in "TV Audio Input" when the DIGITAL AUDIO IN terminal is used for the STB connection. Whenever the connection or settings are changed, reconfirm the points above. Automatic input switching (Power on link) When the following operations are performed, the television will automatically switch the input channel and display the corresponding action. When the television is off, the television will automatically turn on. jWhen play starts on the unit jWhen an action that uses the display screen is performed (e. g. , DIRECT NAVIGATOR screen) [For[the[United[Kingdom[and[Republic[of[Ireland[ jBD-Video, DVD-Video: When playback stops, the TV will automatically return to TV tuner mode. When you switch the TV input to TV tuner mode, this unit will automatically switch to "AUX"*2, "ARC"*1, *2 or "D-IN" (DIGITAL IN)*2. This function does not work when the iPod/iPhone selector is chosen. ( 35) *1 *2 The selection works only when using an ARC compatible TV. "AUX", "ARC" or "D-IN" works depending on the setting in "Setting the audio link". Setting the audio link with the STB With the remote control; Select the STB input channel on the TV. 1 Press [EXT-IN] to select "D-IN". [. . . ] You can enjoy vivid colours of wider colour ranges for a more realistic picture when connected to a TV that supports the x. v. ColourTM with HDMI cable. 24p This is a progressive image recorded at a rate of 24 frames per second (motion-picture film). Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials. VQT2W23 52 Specifications GENERAL Power consumption: Power consumption in standby mode Power supply: iPod/iPhone Connector: WIRELESS LAN Connector: (USB 2. 0 standard) Dimensions (WkHkD): Mass: 100 W Approx. 0. 2 W AC 220 V to 240 V, 50 Hz DC OUT 5 V 500 mA MAX DC OUT 5 V 500 mA 430 mmk62 mmk287 mm Approx. [. . . ]