User manual PANASONIC SC-BTT775EB

[. . . ] Easy Setting Guide The order of setting Blu-ray DiscTM Home Theater Sound System Model No. SC-BTT775 1 1 Prepare the speakers See below 2 Place the speakers See below 3 Connect the cables See over 4 Turn on the main unit See over Easy setup See Easy setup screen Prepare the speakers Speakers Refer to the rear label of the speaker before connecting the corresponding cable. [. . . ] Tighten securely. Tighten securely. STEP 3 Label each speaker cable by attaching the numbered sticker at the position indicated in the illustration. Be sure to match the number on each sticker with the circled number in the illustration. e. g. , Front speaker Lch Subwoofer PURPLE Centre speaker GREEN Front speakers Rch RED Surround speakers Rch GREY Lch WHITE Lch BLUE RS FRONT Lch WHITE 1 speaker Recommended Front speakers (L, R) Surround speakers (LS, RS) STEP 4 Connect the speaker cables. Insert the wire fully, taking care not to insert beyond the wire insulation. : White : Blue line White 60 120 PUSH! Blue line VQC8275 F0111SB0 3 Connect the cables It is possible to play back 3D videos and 3D still pictures by connecting this unit with a 3D compatible TV. For detailed information, refer to the operating instructions. Other connection Broadband Network Connections Connect the cables by colour or by the numbers indicated in the illustration to the appropriate terminals on the rear panel of the unit. PURPLE GREEN RED WHITE GREY BLUE FM indoor antenna (supplied) Adhesive tape By connecting this unit to the network, you can optimise the internet features of this unit. · Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices. · When using the wireless LAN function, the LAN cable that connected to the main unit is not necessary. LAN Main unit 6 5 2 1 R 3 L 4 3 R 3 L SUBWOOFER CENTER FRONT SURROUND 3 3 FM ANT 75 AUX LAN cable (not supplied) Main unit HDMI cable (not supplied) (Recommended for highest quality picture) HDMI (ARC) HDMI If the HDMI terminal is labeled "HDMI (ARC)", you can enjoy TV sound and pictures with a single HDMI cable. [. . . ] Main unit Yes No 2 Turn on the TV 3 Turn on the main unit 4 The Easy setup starts Turn on your TV and select the appropriate video input mode (e. g. , VIDEO 1, AV 1, HDMI, etc. ) to suit the connections to this unit. Press [ ] to turn on the main unit. The on screen display will guide you through the steps. Easy setup Would you like to start easy setup? AC mains lead (supplied) Installing batteries in the remote control R6/LR6, AA OK RETURN Press [, ] to select [Yes] and press [OK]. To a household mains socket [. . . ]