User manual PANASONIC SCBTT880GN

[. . . ] R Save the original carton and packing materials for future shipping and transportation of the unit. R After unpacking the product, take care of the packing materials and/or power plug cap appropriately. R The suffix in the model number will be omitted in these instructions. Language selection: You can select the desired language. [. . . ] Do not ignore this safety feature by tampering with the plug. R Do not place objects on the power cord. Install the unit where no one can step or trip on the cord. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. R Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. From the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. Installation R Place the unit securely on a stable, level surface. Serious damage and/ or injury may result if the unit falls. 2 CAUTION Installation and relocation R After moving the unit from cold areas to warmer areas, wait approximately 30 minutes before turning on the power switch to allow the unit to adjust to the ambient temperature. If the power switch is turned on too soon after a sudden climate change, condensation may form inside the unit, causing malfunction. R Never turn the unit upside down or sideways when moving it. R Never install telephone wiring during a lightning storm (KX-MB1520 only). R Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations (KX-MB1520 only). R Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface (KX-MB1520 only). R Use caution when installing or modifying telephone lines (KX-MB1520 only). R Do not position the unit in a location where it is unstable or subject to vibrations. laser radiation CLASS 1 LASER PRODUCT R The printer of this unit utilises a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. See the operating instructions for the Laser diodes properties. [. . . ] Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. Information on Disposal in other Countries outside the European Union These symbols (A, B, C) are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. [. . . ]