User manual PANASONIC SC-BTT885EG

[. . . ] Verify the type of speaker with the label on the rear of the speaker. [. . . ] Speakers Front speakers FRONT/AVANT CENTER/CENTRE SURROUND/AMBIOPHONIE C Centre speaker Surround speakers e. g. , L Place the speakers RED STEP 1 WHITE Label each speaker cable by attaching the numbered sticker at the position indicated in the illustration. Be sure to match the number on each sticker with the circled number in the illustration. e. g. , Front speaker Lch R GREEN PURPLE SW FRONT Lch 1 Subwoofer Centre speaker Front speakers Rch Lch WHITE Surround speakers BLUE GREY WHITE speaker Rch GREY Lch BLUE LS RS STEP 2 Connect the speaker cables. Insert the wire fully, taking care not to insert beyond the wire insulation. If the HDMI terminal is not labeled "HDMI (ARC)", an "Audio cable" or "Optical digital audio cable" is required to listen to sound from the TV. Audio connection For best quality audio, use the HDMI cable (with an ARC compatible TV) or an optical digital audio cable. If your TV does not support the above, use the audio cable. TV OPTICAL OUT Optical digital audio cable (not supplied) Video cable*1 (supplied) Broadband router, etc. VIDEO IN L *1 Make sure that the video cable connection is made to view photos/videos from the iPod/iPhone. Audio cable (not supplied) Internet AUDIO OUT R 4 Turn on the main unit Connect the AC mains lead to the main unit before connecting to the household mains socket. Main unit 1 Connect the AC mains lead 2 Turn on the TV 3 Turn on the main unit 4 The Easy setup starts Before connecting the AC mains lead; Turn on your TV and select the appropriate video input mode (e. g. , VIDEO 1, AV 1, HDMI, etc. ) to suit the connections to this unit. Press [ ] to turn on the main unit. The on screen display will guide you through the steps. Set the voltage at the bottom of the main unit. 110 127V 220 240V Easy setup Would you like to start easy setup? Yes No VOLT ADJ AC Voltage selector AC mains lead (supplied) Use a flat-head screwdriver to move the voltage selector to the appropriate position for the area in which this system is used. Installing batteries in the remote control R6/LR6, AA OK RETURN Press [, ] to select [Yes] and press [OK]. To a household mains socket [. . . ] Audio cable (not supplied) Internet AUDIO OUT R 4 Turn on the main unit Connect the AC mains lead to the main unit before connecting to the household mains socket. [. . . ]