User manual PANASONIC SC-BTX70

[. . . ] Operating Instructions Blu-ray Disc Home Theater Sound System Model No. SC-BTX70 Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. [. . . ] After the firmware is updated and the system is restarted, the following screen indicates that the firmware update has been completed. The firmware has been updated. Current Installed Version: x. x OK RETURN RQT9464 30 During the update process, no other operations can be performed. Serious damage may occur if you turn off the unit and/or press any buttons. 1) Press [SETUP]. 2) Press [3, 4] to select "General" and press [OK]. 3) Press [3, 4] to select "Firmware Update" and press [OK]. 4) Press [3, 4] to select "Update Now" and press [OK]. 5) Press [2, 1] to select "Yes" and press [OK]. Network settings These settings are used if you will connect this unit to the Internet. ( 38) The connection to the Internet may take time or the Internet may not be connected depending on the connection environment. It is required that you use a broadband connection. Preparation Connect to a broadband network. ( 11) Testing of "IP Address / DNS Settings" Always test the connection when a LAN cable is connected. 1 While stopped Setting the IP address In most cases, default settings can normally be used without making any changes. Set the IP address only when the router has no DHCP server functions or when the router's DHCP server function is disabled. After performing steps 1 ­ 4 ( Press [BD/SD] to select "BD/DVD". 3 Press [3, 4] to select "Network Settings" and press [OK]. 4 Press [3, 4] to select "IP Address / DNS Settings" and press [OK]. 5 Press [3, 4] to select "Connection Test" and press [OK]. IP Address/DNS Settings Connection Test IP Address Auto-Assignment IP Address Subnet Mask Gateway Address DNS-IP Auto-Assignment Primary DNS Secondary DNS Connection Speed Auto-Config Connection Speed Setting OK RETURN On 5 Press [3, 4] to select "IP Address Auto-Assignment" and press [2, 1] to select "Off". 6 Press [3, 4] to select "IP Address", "Subnet Mask" or "Gateway Address" and press [OK]. 7 Enter numbers with the numbered buttons and press [OK]. After checking the specifications for your broadband router, enter each number. If the number is unknown, then check the number of other devices such as personal computers connected via a LAN cable. Assign a different number from those of other devices for the "IP Address" and the same number for others. If a wrong number is entered, then press [CANCEL]. The numeric input range is between 0 and 255. NOTE left) On On 8 Press [2, 1] to select "Yes" and press [OK]. "Testing. . . ": The test is in progress. [. . . ] HÄVITÄ PARISTOT LUONTOA VAHINGOITTAMATTOMALLA TAVALLA. TÄMÄ LAITE ON TARKOITETTU KÄYTETTÄVÄKSI LEUDOSSA ILMASTOSSA. Pistorasia tulee asentaa laitteen lähelle helppopääsyiseen paikkaan. Verkkojohdon pistokkeen on oltava aina helposti käytettävissä. [. . . ]