User manual PANASONIC SCC70EB

[. . . ] Basic Operating Instructions C o m p a c t S t ereo Sys t em SC-C70 Music is borderless and timeless, touching people’s hearts across cultures and generations. Each day the discovery of a truly emotive experience from an unencountered sound awaits. Let us take you on your journey to rediscover music. 02 Delivering the Ultimate Emotive Musical Experience to All At Technics we understand that the listening experience is not purely about technology but the magical and emotional relationship between people and music. We want people to experience music as it was originally intended and enable them to feel the emotional impact that enthuses and delights them. [. . . ] Enable the 2. 4 GHz frequency band on the wireless router. Place this unit as close to the wireless router as possible. ( 11) Note • The setting will be cancelled after the set time limit. • To cancel this setting in the middle, press [ ] or turn the unit to standby mode. No Does your wireless network router support WPS (Wi-Fi Protected Setup™)?Yes (WPS button) Using the WPS button ( 14) (WPS PIN code) Using the WPS PIN code ( 15) No Are you using an Android device?Yes Using “Technics Music App” ( 15) No Using an internet browser ( 16) Yes Using the WAC (Wireless Accessory Configuration) ( 14) ■ Choose a network setting method Are you using an iPod touch/iPhone/iPad? ■ Settings for the first time 1 Press [ ] to turn this unit on. • “Wi-Fi Setup” is displayed. 2 Press [ ], [ ] to select “On” and then press [OK]. • “WAC Mode for iOS” automatically starts. 3 (For “WAC Mode for iOS”) Proceed to step 2 of “Using the WAC (Wireless Accessory Configuration)” ( 14). (For other network setting method) Choose a network setting method. Note • When this unit is switched to standby mode and turned on before the Wi-Fi setting is complete, “Wi-Fi Setup” is displayed. Perform the Wi-Fi setting or select “Off”. ■ Settings using [SETUP] menu 1 Press [SETUP]. 2 Press [ ], [ ] repeatedly to select “Network” and then press [OK]. • When “Wi-Fi” screen is displayed, press [OK]. 3 Press [ ], [ ] to select “On” and then press [OK]. (The wireless LAN function is enabled. ) 4 Choose a network setting method. 13 Network settings Configuration) “WAC Mode for iOS” (Continued) ■ Using the WAC (Wireless Accessory ■ Using the WPS button “WPS Push” If your wireless router supports WPS, you can set up a connection by pressing the WPS button. • A compatible wireless router may have the WPS identifier mark. You can send its Wi-Fi configuration to this unit using an iPhone/iPad/iPod touch. • Supported devices: iPhone/iPad/iPod touch (iOS version 7. 0 or later) • The following explanations are based on an iPhone. • Make sure your iPhone is connected to your home wireless network beforehand. • This unit uses the 2. 4 GHz frequency band only. Check your iPhone is connected using 2. 4 GHz band. 1 Press [ ], [ ] on the remote control to select “WPS Push” and then press [OK]. • “WPS” is displayed. Complete step 2 within 2 minutes. 2 After “WPS” is displayed, press the WPS button on the wireless router. Example: 1 Press [ ], [ ] on the remote control to select “WAC Mode for iOS” and then press [OK]. • “Setting” is displayed. 2 Go to Wi-Fi settings on your iPhone. 3 Select “Technics SC-C70 ******” under the “SET UP NEW AIRPLAY SPEAKER. . . ” on your iPhone. • “******” stands for a character that is unique to each set. • “Linking” is displayed. • When the connection is established, “Success” is displayed. - “Fail” may be displayed if the connection was not complete. Try this method again from [SETUP] menu. If “Fail” is still displayed, try other methods ( 13). 4 The “AirPlay Setup” screen appears on your iPhone. • This unit will be displayed as “Technics SCC70 ******”. [. . . ] 10 m Line of sight*2 *1: Wireless Network Standby (Wired LAN not connected & No clock display) ■ AMPLIFIER SECTION Front speaker (L/R): 30 W + 30 W (1 kHz, T. H. D. 1. 0 %, 6 , 20 kHz LPF) Subwoofer: 40 W (70 Hz, T. H. D. 1. 0 %, 4 , 20 kHz LPF) Output power *2: Prospective communication distance Measurement environment: Temperature 25 °C/ Height 1. 0 m Measure in “Mode1” ■ TUNER SECTION Frequency Modulation (FM) Preset memory Frequency range Antenna terminals DAB DAB memories Frequency band (wavelength) Sensitivity *BER 4x10 -4 DAB external antenna terminal 20 channels Band III (All Band III): 5A to 13F (174. 928 MHz to 239. 200 MHz) Min requirement: –98 dBm F-Connector (75 ) 30 stations 87. 50 MHz to 108. 00 MHz (50 kHz step) 75  (unbalanced) ■ TERMINALS SECTION Headphones Jack USB Support Memory Capacity Maximum number of folders (albums) Maximum number of files (songs) File system USB port power Ethernet interface AUX Input Digital Input Format support Stereo, 3. 5 mm REAR USB Type A Connector 2 TB (max) 800 8000 FAT16, FAT32 DC OUT 5 V 0. 5 A (max) LAN (100BASE-TX/10BASE-T) Stereo, 3. 5 mm Jack Optical digital input (Optical terminal) LPCM 21 Specifications ■ FORMAT SECTION USB-A USB Standard (Continued) Wi-Fi SECTION USB 2. 0 high-speed USB Mass Storage class Standard Frequency Band Security Encryption Type Authentication type WPS version IEEE802. 11b / g / n 2. 4 GHz band (1 - 13 ch) WPA2™, Mixed mode WPA2™/ WPA™ TKIP / AES PSK WEP (64 bit/128 bit) Version 2. 0 ■ File format This unit supports the following file formats. • This unit does not support the playback of copy-protected music files. [. . . ]