User manual PANASONIC SC-CMAX5E

[. . . ] SC-CMAX5 ČESKY Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Book 2 ページ ２０１５年６月１２日　金曜日　午前１１時２２分 Safety precautions WARNING Unit ≥ To reduce the risk of fire, electric shock or product damage, – Do not expose this unit to rain, moisture, dripping or splashing. € Do not place objects filled with liquids, such as vases, on this unit. [. . . ] The sequence of album can change after the recording. The recordings are kept in a folder named “REC_DATA” in the USB device. [USB\B] status indicator blinks in red during recording. Some tracks may take a longer time to record. Some tracks cannot be recorded because of the condition of the source. The recorded folder name may be different from the original folder because of the auto rename function. There will be no sound output during recording from [USB\A] to [USB\B]. Panasonic cannot be held responsible on the action of consumer to record copyrighted contents which can cause copyright infringement. TRK DEL ALB DEL FORMAT Adding track marks ([AUX]) When recording from external equipment, you can divide tracks using various modes. Press [3, 4] to select the setting and then press [OK]. § Recording starts automatically when the other equipment starts to play. Recording pauses when it detects silence for 3 seconds. ‰ You can also add track marks manually. § §To add a track mark manually (except in “SYNCHRO” mode) Press [OK] at desired marking point during recording. Track length limit MANUAL: 60 minutes TIME MARK: 5 minutes When a track reaches its maximum length, a track mark will be added while recording continues. (The track length limit counter is reset when a track mark is added manually or when recording pauses. Turning the timer on 1 Prepare the selected music source. Prepare the music source you want to listen to (USB or external equipment) and set the volume. play timer 1 2 Press [SETUP] repeatedly to select “CLOCK”. Press [3, 4] to set the time and then press [OK]. Connect the USB device to [USB\B] Record timer and prepare the external equipment. 2 ≥ To check the time, press [SETUP] repeatedly to select “CLOCK” and then press [OK] once. [. . . ] ‰ Check that the ventilation opening of the unit is not obstructed. “USB OVER CURRENT ERROR” ≥ The USB device is drawing too much power. Remove the USB device and turn the unit off. €VBR” ≥ The system cannot show the remaining play time for variable bit rate (VBR) tracks. [. . . ]