User manual PANASONIC SC-EN38DB

[. . . ] Operating Instructions CD Stereo System Model No. Note SC-EN38DB "EB" on the packaging indicates the United Kingdom. These instructions are applicable to the following systems. System Main unit Speakers SC-EN38DB SA-EN38DB SB-EN38 Dear customer Thank you for purchasing this product. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference. Table of contents Supplied accessories The remote control Attach the stand to the unit Placement of speakers Control guide Connections Disc operations Radio operations DAB External unit Timer Sound adjustment Troubleshooting guide Specifications Safety precautions Caution for AC Mains Lead Maintenance 2 2 2 2 3 4 5 6 7 10 12 12 13 14 15 back cover back cover EB RQTV0294-1B Supplied accessories Please check and identify the supplied accessories. [. . . ] Note · CBI (Control/Bulk/Interrupt) is not supported. · A device using NTFS file system is not supported [Only FAT 16/32 (File Allocation Table 16/32) file system is supported]. · Depending on the sector size, some files may not work. · This unit can access up to 255 albums and 2500 tracks. · The maximum number of tracks in a folder are 999 tracks. · Only one memory card will be selected when connecting a multiport USB card reader. Typically the first memory card inserted. · Disconnect the USB card reader from the unit when you remove the memory card. Failure to do so may cause malfunction to the device. · When you connect your digital audio player to the USB jack, it charges all the time except in standby mode. To skip track To skip album Direct access play (Play starts with the track you select. ) Connecting and playing a Bluetooth device By connecting a Bluetooth Receiver (e. g SH-FX570R, sold separately), you can receive and play the audio stored in your Bluetooth audio source device (mobile phone etc). Changing the main unit and remote control mode The remote control and main unit are factory-set to "REMOTE 1" mode. If your remote control affects other equipment during operation, you can switch to operate in "REMOTE 2" mode. male-female cable (not included) To switch to "REMOTE 2" mode Press [DAB/FM/MUSIC P. ] to select "FM". (While pressing [DAB/FM/MUSIC P. ] on the main unit) Press and hold [2] until "REMOTE 2" appears on the main unit display. Press and hold [ENTER] and [2] for at least 2 seconds. The main unit and remote control are now set to operate in "REMOTE 2" mode. To return to "REMOTE 1" mode Perform steps 1 to 3 but use [1] instead of [2] for steps 2 and 3. ("REMOTE 1" appears on the main unit during step 2. ) The remote control cannot work with the main unit if their modes are different. "REMOTE 1" or "REMOTE 2" appears on the main unit when you operate the remote control. * * If "REMOTE 1" appears (The main unit is in "REMOTE 1" mode. ) Press and hold [ENTER] and [1] on the remote control for at least 2 seconds. If "REMOTE 2" appears (The main unit is in "REMOTE 2" mode. ) Press and hold [ENTER] and [2] on the remote control for at least 2 seconds. Bluetooth Receiver (not included) Connect the Bluetooth Receiver to the OPTION PORT through a male-female cable (see the Bluetooth Receiver's instruction manual). Press [q/h, OPTION] to select OPTION as the source. Pair and play your Bluetooth audio device (see the device's instruction manual). - To play / To pause play Press [q/h, OPTION]. - Other basic operation functions are similar to "USB operations". [. . . ] Open the fuse cover with with a screwdriver. CAUTION! IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE SOCKET. If a new plug is to be fitted please observe the wiring code as stated below. If in any doubt please consult a qualified electrician. 2. [. . . ]