User manual PANASONIC SCHC10

[. . . ] 9 Changing the main unit and remote control mode To return to "REMOTE 1" mode Repeat the steps ( left) but replace [2] with [1]. ("REMOTE 1" will be displayed. ) 12 Troubleshooting guide "ADJUST TIMER" · Play timer is not set. "PGM FULL" · The number of programmed tracks is limited to 24. "NO PLAY" · A CD-ROM disc that is not in CD-DA or MP3 format is inserted. [. . . ] Dispose of used batteries according to the manufacturer's instructions. THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES. MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson. This product may receive radio interference caused by mobile telephones during use. If such interference is apparent, please increase separation between the product and the mobile telephone. Voltage Do not use high voltage power sources. This can overload the unit and cause a fire. Check the source carefully when setting the unit up on a ship or other place where DC is used. Service Do not attempt to repair this unit by yourself. If sound is interrupted, indicators fail to light, smoke appears, or any other problem that is not covered in these instructions occurs, disconnect the AC mains lead and contact your dealer or an authorized service centre. Electric shock or damage to the unit can occur if the unit is repaired, disassembled or reconstructed by unqualified persons. Extend operating life by disconnecting the unit from the AC mains if it is not to be used for a long time. AC mains lead protection Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fire or electric shock. Do not pull, bend, or place heavy items on the lead. Grasp the plug firmly when unplugging the lead. Pulling the AC mains lead can cause electric shock. This can cause electric shock. Maintenance g Pull out the power plug from the outlet for maintenance beforehand and then wipe it using a soft and dried cloth. · When dirt is heavy, wring the cloth moistened in water tightly to wipe the dirt, and then wipe it with a dried cloth. · Do not use solvents such as benzine, thinner, alcohol and detergent, which may deform the coating of the outer case. · When using a chemical cloth, follow the precautions. g Care on the CD lens · Clean the lens regularly to prevent malfunctions. Use a blower to remove dust and a cotton swab if it is extremely dirty. · Do not use the lens cleaner of the CD type. Back of product RQT4389ZAA RQLS0418 Inside of product 1 Connections Back View 5 4 3 1 Control guide 4 4 5 Disc operations MP3: Press [e, r] to select the album. Press [y/i] once and then the numeric buttons to select the track. [. . . ] Press [y/i] once and then the numeric buttons to select the track. USB operations The USB connectivity enables you to connect and play MP3 tracks from USB mass storage class. Preparation: · Before connecting any USB mass storage device to the unit, ensure that the data stored therein has been backed up. · It is not recommended to use a USB extension cable. The device connected via the cable will not be recognised by this unit. [. . . ]