User manual PANASONIC SC-HC17EC

[. . . ] For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference. Indd 1 RQT9678-1E 5/16/2012 4:52:02 PM ENGLISH Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same. [. . . ] € Recordings will not necessarily be played in the order you recorded them. Pause Skip track Search through track Skip album View information Press [4/9]. USB • Compatible USB devices which are defined as mass storage class: – USB devices that support bulk-only transfer – USB devices that support USB 2. 0 full speed • Files are defined as tracks and folders are defined as albums. € Track must have the extension “. € This system can access up to: – 255 albums (including root folder) – 2500 tracks – 999 tracks in one album • CBI (Control/Bulk/Interrupt) is not supported. • NTFS file system is not supported (only FAT 12/16/32 file system is supported). € Some files can fail to work because of the sector size. € Text data that the system does not support can show differently. play menu 1 2 Press [PLAY MENU] to select “PLAYMODE” or “REPEAT”. Press [R, T] and then press [OK] to select the desired mode. RQT9678 6 6 Note: • During random playback, you cannot skip to tracks which have been played. € The setting returns to default when you open the sliding door. €MONO” is also cancelled when you change the frequency. The tuner presets all the stations it can receive into the channels in ascending order. To memorise the setting Continue with steps 4 through 6 of “Manual tuning and presetting”. Checking the signal status Press [PLAY MENU] to select “FM STATUS” and then press [OK]. fM FM ST FM MONO The FM signal is in monaural. The system is not tuned in to a station. 3 Manual tuning and presetting RDS broadcasting This system can show the text data transmitted by the radio data system (RDS) available in some areas. To tune automatically, press and hold the button until the frequency starts changing quickly. “STEREO” is shown when the system is tuned in to a stereo broadcast. [. . . ] €–VBR–” • The system cannot show the remaining play time for variable bit rate (VBR) tracks. Memory reset (initialisation) Reset the memory when the following situations occur: • There is no response when buttons are pressed. € You want to clear and reset the memory contents. € Switch off the TV or move it away from the system. [. . . ]