User manual PANASONIC SC-HC28EC

[. . . ] SC-HC28 SC-HC18 SC-HC28 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Book 2 ページ ２０１３年１月３日　木曜日　午後９時５３分 Safety precautions WARNING Unit ≥ To reduce the risk of fire, electric shock or product damage, – Do not expose this unit to rain, moisture, dripping or splashing. € Do not place objects filled with liquids, such as vases, on this unit. [. . . ] *1: “CD”, “USB”, “IPOD_PORT” ([SC-HC28]), “IPOD_DOCK” ([SC-HC28]) and “FM” can be set as the music source. 1 2 Press [SETUP] to select “CLOCK”. Press [3, 4] to set the time and then press [OK]. ‰ To display the clock, press [SETUP] to select “CLOCK” and then press [OK] once. (During standby , press [DISPLAY] once. ) ≥ The clock is reset when there is a power failure or when the AC mains lead is removed. ≥ Reset the clock regularly to maintain accuracy. Sleep timer The sleep timer can turn the unit off after a set time. €SLEEP 120” ^---------------------- OFF (Cancel) (-------------------b ≥ The remaining time is indicated on the unit’s display except when other operations are performed. ‰ The play timer and sleep timer can be used together. Book 10 ページ ２０１３年１月３日　木曜日　午後９時５３分 Others Automatic standby As a factory preset, this unit will always turn off automatically if there is no sound output and no operation for approx. To cancel this function Troubleshooting Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, consult your dealer for instructions. To return all settings to the factory preset When the following situations occur, reset the memory: ≥ There is no response when buttons are pressed. ‰ You want to clear and reset the memory contents. ‰ To turn automatic standby on, select “ON” in step 2. ‰ This setting cannot be selected when “FM” is the source. (Wait for at least 3 minutes before proceeding to step 2. ) 2 While pressing and holding down [Í/I] on the unit, reconnect the AC mains lead. Display brightness The brightness of this unit’s display can be changed. ‰ All the settings are returned to the factory preset. You will need to reset the memory items. [. . . ] C Pad (supplied) 2 Attach the pad near the corner of this page. , iPhone 5  D There will be a gap between this unit’s sliding door and the connected device. Keep the other pad in a secure place for future use. €Made for iPod”, “Made for iPhone” oraz “Made for iPad” oznacza, że urządzenie elektroniczne zostało specjalnie zaprojektowane do współpracy odpowiednio z urządzeniem iPod, iPhone lub iPad i spełnia normy wydajności firmy Apple. [. . . ]