User manual PANASONIC SC-HC38DBEB

[. . . ] SC-HC38_DBEB_DBGN_GS~RQT9743-B. book 1 ページ ２０１３年１月２１日　月曜日　午後１時６分 Operating Instructions Compact Stereo System Model No. SC-HC38DB SC-HC38 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Included Installation Instructions (l 2, 3 and 18, 19) The installation work should be done by a qualified installation specialist. Before commencing work, carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly. [. . . ] 5 Press [3, 4] to select the channel and then press [OK]. Presetting stations automatically ∫ To improve FM sound quality 1 2 While receiving FM broadcasts, press [PLAY MENU] repeatedly to select “FM MODE”. Press [3, 4] to select “MONO” and then press [OK]. 1 2 Press [PLAY MENU] to select “A. PRESET”. Press [3, 4] to select “LOWEST” or “CURRENT” and then press [OK]. LOWEST: To begin auto preset with the lowest frequency (FM 87. 50, AM 520 or AM 522). CURRENT: To begin auto preset with the current frequency. * * To change the frequency, refer to “Manual tuning and presetting”. ≥ This setting can be preset and memorised. To do so, continue to step 4 of “Manual tuning and presetting”. ≥ Select “STEREO” in step 2 to return to stereo broadcasts. ≥ “MONO” is cancelled if the frequency is changed. ≥ If “MONO” is selected, regardless of the type of signal this unit is receiving, “FM MONO” is displayed. (l below) The tuner starts to preset all the stations it can receive into the channels in ascending order. ∫ To display the current FM signal status While receiving FM broadcast, press [DISPLAY]. “FM ST”: “FM”: The FM signal is in stereo. The FM signal is in monaural. Listening to a preset channel Preparation 1 Press [PLAY MENU] repeatedly to select “TUNEMODE”. 2 Press [3, 4] to select “PRESET” and then press [OK]. Press [:/6] or [5/9] to select the channel. ≥ “FM” is also displayed even if this unit is not tuned to a station. ≥ “STEREO” is displayed when this unit tunes to a stereo broadcast. 11 RQT9743 SC-HC38_DBEB_DBGN_GS~RQT9743-B. book 12 ページ ２０１３年１月２１日　月曜日　午後１時６分 Sound adjustment The following sound effects can be added to the audio output. Play timer You can set the timer so this unit turns on at a certain time every day. Preparation Set the clock (l left). 1 2 Press [SOUND] repeatedly to select the effect. Press [3, 4] to select the setting and then press [OK]. “LEVEL 1”, “LEVEL 2” or “OFF”. ≥ The factory preset is “OFF”. ∫ Setting the timer Direct-Vocal Surround (D. SURROUND) Preset EQ (PRESET EQ) 1 2 3 1 2 3 4 Press [SETUP] repeatedly to select “TIMER ADJ”. Press [3, 4] to set the starting time (“ON TIME”) and then press [OK]. Press [3, 4] to set the finishing time (“OFF TIME”) and then press [OK]. “HEAVY” (heavy), “SOFT” (soft), “CLEAR” (clear), “VOCAL” (vocal) or “FLAT” (flat/off). ≥ The factory preset is “HEAVY”. Bass (BASS) or Treble (TREBLE) Dynamic Bass* (D. BASS) 1 Adjust the level (j4 to i4). “ON D. BASS” or “OFF D. BASS”. ≥ The factory preset is “ON D. BASS”. ∫ Turn the timer on Select the music source*1 and set the desired volume. Press [SETUP] repeatedly to select “TIMER SET”. Press [3, 4] to select “SET” and then press [OK]. ≥ “F” is displayed. ≥ To turn the timer off, select “OFF”. *1: This function can also be selected with the [D. BASS] button on the unit. [. . . ] For advice on exact Authorised Service Centre locations for your product, please telephone our Customer Care Centre on 132600 or visit our website and use the Service Centre Locator. In addition to your rights under this warranty, Panasonic products come with consumer guarantees that cannot be excluded under the Australian Consumer Law. If there is a major failure with the product, you can reject the product and elect to have a refund or to have the product replaced or if you wish you may elect to keep the goods and be compensated for the drop in value of the goods. You are also entitled to have the product repaired or replaced if the product fails to be of acceptable quality and the failure does not amount to a major failure. [. . . ]