User manual PANASONIC SC-HC38EC

[. . . ] SC-HC38 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Included Installation Instructions (l 2 and 16, 17) The installation work should be done by a qualified installation specialist. Before commencing work, carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly. [. . . ] € Even if the audio source or the volume is changed, the timer will still use the audio source and volume that was set when the timer was turned on. *1: “CD”, “USB”, “IPOD_PORT”, “IPOD_DOCK” and “FM” can be set as the music source. Sleep timer The sleep timer can turn the unit off after a set time. 1 2 Press [SETUP] to select “SLEEP”. Press [3, 4] to set the time (in minutes) and then press [OK]. OFF (Cancel) (------------------------J ≥ The remaining time is indicated on the unit’s display except when other operations are performed. ‰ The play timer and sleep timer can be used together. Book 11 ページ ２０１２年１２月２８日　金曜日　午後６時５３分 Others Automatic standby As a factory preset, this unit will always turn off automatically if there is no sound output and no operation for approx. To cancel this function Troubleshooting Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, consult your dealer for instructions. To return all settings to the factory preset When the following situations occur, reset the memory: 1 Disconnect the AC mains lead. (Wait for at least 3 minutes before proceeding to step 2. ) 2 While pressing and holding down [Í/I] on the unit, reconnect the AC mains lead. ‰ To turn automatic standby on, select “ON” in step 2. ‰ This setting cannot be selected when “FM” is the source. Display brightness The brightness of this unit’s display can be changed. ‰ All the settings are returned to the factory preset. You will need to reset the memory items. Common problems ≥ To cancel the dimmer, select “OFF” in step 2. ‰ An AC mains lead or fluorescent light is near the cords. Keep other appliances and cords away from this unit’s cables. Changing the unit and remote control code When other Panasonic equipment responds to the supplied remote control, change the remote control code. [. . . ] pANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY , INCLUDING DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING. ‰ Be sure to install this unit as indicated within these operating instructions. 66 mm 30 mm 118 mm 143 mm 202 mm 232 mm Wall mount instructions Before installation, turn the unit off and disconnect the AC mains lead from the mains socket. 500 mm 700 mm 1 16 RQT9746 Detach the stand from the unit. [. . . ]