User manual PANASONIC SC-HC39EC

[. . . ] SC-HC39 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Included Installation Instructions (l 2 and 16, 17) The installation work should be done by a qualified installation specialist. Before commencing work, carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly. [. . . ] 1 2 Press [SETUP] to select “SLEEP”. Press [3, 4] to set the time (in minutes) and then press [OK]. €OFF” (Cancel) (------------------J ≥ The remaining time is indicated on the unit’s display except when other operations are performed. ‰ The play timer and sleep timer can be used together. The sleep timer is always the main timer on the unit. Book 12 ページ ２０１４年１月１７日　金曜日　午後３時５８分 Others Auto off function As a factory default, this unit will turn to standby mode automatically if there is no sound and it is not being used for approximately 20 minutes. To cancel this function Changing the unit and remote control code When other Panasonic equipment responds to the supplied remote control, change the remote control code. While pressing and holding [SELECTOR] on the unit, press and hold [USB/CD] on the remote control until the unit’s display shows “REMOTE 2”. Press and hold [OK] and [USB/CD] on the remote control for at least 4 seconds. ‰ To turn the function on, select “ON” in step 2. ‰ This setting cannot be selected when “FM” is the source. ‰ When connected to a Bluetooth® device, the function does not work. Bluetooth® standby When “SC-HC39” is selected from a paired Bluetooth® device’s Bluetooth® menu, this unit will turn on automatically from standby mode and establish a Bluetooth® connection. ‰ To change the mode back to “REMOTE 1”, press [USB/CD] to select “CD” and then repeat the step 2 and 3 but replace [USB/CD] with [ ]. Software update Occasionally, Panasonic may release updated software for this unit that may add or improve the way a feature operates. These updates are available free of charge. For more details, refer to the following website. ‰ To turn the function off, select “OFF” in step 2. ˆ Checking the software version The version of the installed software is displayed. If you are uncertain about some of the check points, or if the solutions indicated in the following guide does not resolve the issue, then consult your dealer for instructions. To return all settings to the factory defaults When the following situations occur, reset the memory: ≥ There is no response when buttons are pressed. ‰ You want to clear and reset the memory contents. [. . . ] ≥ Screw tightening torque: 50 N0cm to 70 N0cm. Screw (supplied) 3 Attach the fall prevention cord (not supplied) to this unit. cord (not supplied) Safety precautions Professional installation is required. The installation should never be done by any other than a qualified installation specialist. [. . . ]