User manual PANASONIC SC-HC3DB

[. . . ] Operating Instructions Compact Stereo System Model No. SC-HC3DB Supplied accessories Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts. (Product numbers correct as of March 2009. These may be subject to change. ) 1 Remote control (N2QAYB000396) Dear customer Thank you for purchasing this product. [. . . ] When DAB is selected for the first time, this function starts automatically. Note Even if the station is stored into memory, some stations may not broadcast depending on the time of day etc. If this occurs, "NO SERVICE" is displayed. When a frequency is tuned the ensemble corresponding to the frequency is displayed. The station first in alphanumeric order is broadcast. Note "SCAN FAILED" appears if no stations are memorized. If this occurs, adjust the antenna and try Auto scanning or change the Auto scan frequency range ( page 13). 2 Press [PLAY MODE] to select "STATION TUNE". Each time you press the button: "STATION TUNE" "PRESET TUNE" Press [u/t] or [y/i] to select a station. The station name changes in alphanumeric order. Station Memory Updating When there is a station name change, or a new station begins broadcasting, the unit memory is automatically updated when: · The previous station name is displayed by selecting "STATION TUNE". · One of the stations already broadcasting on the same frequency with the new station is displayed by selecting "STATION TUNE". Note · Deleting stations that are no longer broadcasting is not automatic. If you want to delete a station, perform Auto scan again and the new memory is created. · When a new frequency begins broadcasting, stations on the new frequency are not automatically added to memory. Perform Auto scan to add them to memory. Also, you may need to change the Auto scan range if the new frequency is outside the factory set Auto scan range ( page 13). 3 DAB Auto Scan Press and hold [PLAY MODE] until "DAB AUTO SCAN" appears. When a frequency is tuned by Auto scanning on this unit, the ensemble corresponding to the frequency is displayed for approximately 2 seconds. Note · When updating memory with Auto scan, preset stations are not erased or changed. · When a frequency cannot be received, the previous memory is restored. · Total stations received is displayed for approximately 2 seconds. STATION TUNE You can select stations from the memory created as shown on page 10 in alphanumeric order. You can easily select your favorite stations by using presets ( page 12). RQTX0256 11 DAB (continued) Presetting Presetting channel Up to 20 channels can be set. 1 Press [u/t] or [y/i] to select a station. Press the numeric buttons to select a channel. [. . . ] For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC. By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. [. . . ]