User manual PANASONIC SC-HC400GN

[. . . ] SC-HC402 SC-HC400 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Included Installation Instructions (l 2, 3 and 20, 21) The installation work should be done by a qualified installation specialist. Before commencing work, carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly. [. . . ] €SLEEP 120” ^---------------- “OFF” (Cancel) (""""""} Saving the sound settings You can save your desired sound settings to “SOUND 1”, “SOUND 2” or “SOUND 3” as “MY SOUND”. 1 2 3 Adjust your desired sound effects. (l above) Press [SETUP] to select “SAVE MY SOUND”. Press [2, 1] to select a setting number and then press [OK]. ‰ The sound settings previously saved will be replaced when you save new settings to the same setting number. π ≥ The remaining time is indicated on the unit’s display at every minute except when other operations are performed. €SLEEP 1” is always shown when only 1 minute remains. ‰ The play timer and sleep timer can be used together. The sleep timer is always the main timer on the unit. Recalling the sound settings you have saved 1 2 14 TQBJ0987 Press [SOUND] to select “MY SOUND”. Press [2, 1] to select the desired sound setting number and then press [OK]. Book 15 ページ ２０１７年１月２０日　金曜日　午前１０時５８分 Play timer You can set the timer so this unit turns on at a certain time every day. Bluetooth® standby When “SC-HC402” or “SC-HC400” is selected from a paired Bluetooth® device’s Bluetooth® menu, this unit will turn on automatically from standby mode and establish a Bluetooth® connection. Press [3, 4] to set the starting time (“ON TIME”) and then press [OK]. Press [3, 4] to set the finishing time (“OFF TIME”) and then press [OK]. Press [3, 4] to select the music source* and then press [OK]. π ≥ To turn the function off, select “OFF” in step 2. ≥ The factory default is “OFF”. If this function is set to “ON”, the standby power consumption will increase. Turning the timer on Prepare the selected music source and set the desired volume. Changing the unit and remote control code When other Panasonic equipment responds to the supplied remote control, change the remote control code. 1 2 3 Press [CD/USB] repeatedly to select “CD”. [. . . ] This warranty does not cover the following items unless the fault or defect existed at the time of purchase: (e) DVD, Blu-ray or Recordable Discs (a) Cabinet Part(s) (b) Video or Audio Tapes (f) Video / Audio Heads from wear and tear in normal use (c) SD cards or USB devices (g) Information stored on Hard Disk Drive, USB stick or SD card (d) User replaceable Batteries (h) DTV reception issues caused by TV Aerial / Cabling / Wall socket(s) etc 5. Some products may be supplied with Ethernet connection hardware. The warranty is limited on such products and will not cover (a) Internet and or DLNA connection / setup related problems (b) Access fees and or charges incurred for internet connection (c) The use of incompatible software or software not specifically stipulated in the product operations manual; and (d) Any indirect or consequential costs associated with the incorrect use or misuse of the hardware, its connection to the internet or any other device. To claim warranty service, when required, you should: Telephone Panasonic’s Customer Care Centre on 132600 or visit our website referred to below and use the Service Centre Locator for the name/address of the nearest Authorised Service Centre. [. . . ]