User manual PANASONIC SC-HD505

[. . . ] Please keep this manual for future reference. The illustrations shown may differ from your unit. Included Installation Instructions The installation should be done by a qualified installation specialist. Before commencing work, carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly. You may need them when maintaining or moving this unit. ) If you have any questions contact For U. S. A. [. . . ] jWhen the input channel on the TV is changed. § Only when speaker output is set to this unit. If "Power off link" is activated on the TV, this unit will turn off when the TV is turned off. Automatic lip-sync function (for HDAVI Control 3 or later) Delay between audio and video is automatically adjusted, enabling you to enjoy smooth audio for the picture. The delay information is automatically set if the TV is compatible to VIERA Link "HDAVI Control 3 or later" and the VIERA Link is set to "On". When the delay information cannot be retrieved, the audio delay is set to 40 ms. 16 VIERA Link "HDAVI Control", based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers' equipment that supports HDMI CEC cannot be guaranteed. This unit supports "HDAVI Control 5" function. "HDAVI Control 5" is the newest standard (current as of December, 2009) for Panasonic's HDAVI Control compatible equipment. This standard is compatible with Panasonic's conventional HDAVI equipment. Please refer to individual manuals for other manufacturers' equipment supporting VIERA Link function. Specifications GENERAL Power consumption: This unit: 27 W Active subwoofer: 20 W Digital transmitter: 1. 2 W This unit: Approx. 0. 1 W Power consumption in off mode: Active Subwoofer: Approx. 0. 2 W Power supply: AC 120 V, 60 Hz SPEAKER SECTION FRONT SPEAKERS (BUILT-IN) Type: 1 way, 1 speaker system (Bass Reflex) Full range: 6. 5 cm (21/2q) Cone typek2 ACTIVE SUBWOOFER Type: 1 way, 1 speaker system (Kelton type) Woofer: 16 cm (61/2q) Cone type Passive radiator: 25 cm (10q) Output sound pressure: 78 dB/W (1 m) Frequency range: 35 Hz to 180 Hz (s16 dB), 40 Hz to 160 Hz (s10 dB) Power consumption in standby mode: Dimensions (WkHkD): This unit (Without wall mount bracket) 1029 mmk108 mmk58 mm (401/2qk41/4qk29/32q) (With wall mount bracket) 1029 mmk108 mmk80 mm (401/2qk41/4qk35/32q) Active Subwoofer 250 mmk323 mmk356 mm (927/32qk1223/32qk141/32q) Digital transmitter 43. 5 mmk37. 3 mmk8. 2 mm (123/32qk115/32qk5/16q) Mass (Weight): This unit (Without wall mount bracket) Approx. 2. 8 kg (6. 2 lbs) (With wall mount bracket) Approx. 2. 9 kg (6. 4 lbs) Active Subwoofer Approx. It is possible that the insulation sheet has not been removed. ( 7) The remote control and this unit are using different codes. ( 20) It may be necessary to set the code of the remote control again after changing the battery of the remote control. ( 20) This unit does not operate correctly. If the HDMI cable is connected to the wrong terminal (HDMI AV IN or HDMI AV OUT), this unit will not operate correctly. Turn this unit off, disconnect the AC power supply cord and reconnect the HDMI cable(s). ( 11) 18 Sound No sound (or image). ( 14) Check the connections to the other devices. ( 11) Check the audio output settings on the connected device. When connected to an ARC compatible TV, check if the TV's connected terminal is ARC compatible. If the connections are correct, there might be a problem with the cables. [. . . ] Insert the lock pins as illustrated in the image below. Make sure that the lock pin does not get caught on the fall prevention cord. A Do not insert the lock pin farther than this point. 8 Drive 2 screws (not supplied) into the screwing positions identified in step 4. A B C D E At least 30 mm (13/16q) 4. 0 mm (5/32q) 7. 8 mm to 9. 4 mm (5/16q to 13/32q) Wall 5. 0 mm to 6. 0 mm (3/16q to 1/4q) Take care when fixing this unit to the wall. Always ensure that there are no electrical cables or pipes in the wall before hanging this unit. Keep the screws out of reach of children to prevent swallowing. Be sure to use commercially available screws with nominal diameter of 4. 0 mm (5/32q) suited to the wall surface material (wood, steel frame, concrete, etc. ) and also capable of supporting over 20 kg (44. 1 lbs) each for attaching this unit to the wall. [. . . ]