User manual PANASONIC SC-HD81

[. . . ] Please keep this manual for future reference. The illustrations shown may differ from your unit. Included Wall Mounting Installation Instructions The installation should never be done by any other than a qualified installation specialist. Before commencing work, carefully read these wall mounting installation instructions and the operating instructions to ensure that installation is performed correctly. You may need them when maintaining or moving this unit. ) Model number suffix "EB" denotes UK model. EB RQTX1182-B WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. [. . . ] Please refer to individual manuals for other manufacturers' equipment supporting VIERA Link function. Automatic input switching When the following operations are performed, this unit will automatically turn on§ and change the input channel to the corresponding source. j When play starts on an HDMI connected device. j When the input channel on the TV is changed. § Only when speaker output is set to this unit. If "Power off link" is activated on the TV, this unit will turn off when the TV is turned off. Automatic lip-sync function (for HDAVI Control 3 or later) Delay between audio and video is automatically adjusted, enabling you to enjoy smooth audio for the picture. The delay information is automatically set if the TV is compatible to VIERA Link "HDAVI Control 3 or later" and the VIERA Link is set to "On". When the delay information cannot be retrieved, the audio delay is set to 40 ms. 16 Specifications GENERAL This unit: 26 W Active subwoofer: 25 W Digital transmitter: 1. 2 W Power consumption in standby mode: This unit: Approx. 0. 2 W Power consumption in off mode: Active subwoofer: Approx. 0. 4 W Power supply: AC 220 V to 240 V, 50 Hz Dimensions (WkHkD): This unit (Without wall mount bracket) 1029 mmk108 mmk58 mm (With wall mount bracket) 1029 mmk108 mmk80 mm Active subwoofer 250 mmk323 mmk356 mm Digital transmitter 43. 5 mmk37. 3 mmk8. 2 mm Mass: This unit (Without wall mount bracket) Approx. 2. 8 kg (With wall mount bracket) Approx. 0. 0095 kg Operating temperature range: 0 oC to r40 oC Operating humidity range: 20 % to 80 % RH (no condensation) Power consumption: SPEAKER SECTION FRONT SPEAKERS (BUILT-IN) Type: 1 way, 1 speaker system (Bass Reflex) Full range: 6. 5 cm Cone typek2 ACTIVE SUBWOOFER Type: 1 way, 1 speaker system (Kelton type) Woofer: 16 cm Cone type Passive radiator: 25 cm Output sound pressure: 78 dB/W (1 m) Frequency range: 35 Hz to 180 Hz (j16 dB) 40 Hz to 160 Hz (j10 dB) TERMINAL SECTION HDMI This unit supports "HDAVI Control 5" function. HDMI input Input connector: Type A (19 pin) HDMI AV output Output connector: Type A (19 pin) Digital Audio Input (TV only) Optical digital input: Optical terminal Sampling frequency: 32 kHz, 44. 1 kHz, 48 kHz Audio Format: LPCM, Dolby Digital IR Blaster Terminal 1: 3. 5 mm jack WIRELESS SECTION Wireless module Frequency range: 2. 4 GHz to 2. 4835 GHz Number of channels: 3 AMPLIFIER SECTION RMS Output Power Front ch: 60 W per channel (4 ), 1 kHz, 10 % THD Subwoofer ch: 120 W per channel (8 ), 100 Hz, 10 % THD Total RMS Dolby Digital mode power: 240 W 1 Specifications are subject to change without notice. 2 Total harmonic distortion is measured by a digital spectrum analyzer. 17 Operating Instructions Audio information Compatible audio formats This unit is compatible with the following formats: Dolby Digital, DTS Digital Surround, 2-channel LPCM and multi-channel LPCM. When using the optical digital audio cable, this system is not able to play audio with a sampling frequency greater than 48 kHz. When connected to an ARC compatible TV, check if the TV's connected terminal is ARC compatible. If the connections are correct, there might be a problem with the cables. Reconnect the unit with different cables. When using the optical digital audio cable, this system is not able to play audio with a sampling frequency greater than 48 kHz. Sound is not heard when playing DVD-Audio. This may occur due to digital copyright protection of the disc when using the optical digital audio cable. This system is not able to play audio with a sampling frequency greater than 48 kHz. If the " D/DTS" indicator is blinking, unplug the AC mains lead and consult your dealer. If the "TV, BD/DVD" indicator is blinking, try the following to correct the problem. Consult your dealer if the problem persists. Turn the connected device off and on again. [. . . ] Make sure that the lock pin does not get caught on the fall prevention cord. A Do not insert the lock pin farther than this point. 8 Drive 2 screws (not supplied) into the screwing positions identified in step 4. A B C D E At least 30 mm 4. 0 mm 7. 8 mm to 9. 4 mm Wall 5. 0 mm to 6. 0 mm Be sure to use commercially available screws with nominal diameter of 4. 0 mm suited to the wall surface material (wood, steel frame, concrete, etc. ) and also capable of supporting over 20 kg each for attaching this unit to the wall. The position in the wall where the screw is to be attached should be capable of supporting over 20 kg. Improper attachment may result in damage to the wall and this unit. Wall Mounting Installation Instructions Take care when fixing this unit to the wall. Always ensure that there are no electrical cables or pipes in the wall before hanging this unit. [. . . ]