User manual PANASONIC SC-HT1000PP

[. . . ] Operating Instructions Operations Guide Before using this product, perform setup and connections after carefully reading the Setup Guide. Model No. Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. Region number supported by this unit The region number of this unit is "1". [. . . ] Depending on the state of recording, the actual number of play lists or scenes that can be recorded may be less than that specified in this manual. You cannot edit still picture images. RQT7061 EDITING 29 Editing programs Erase Program HOME THEATER TV [RAM] [DVD-R] POWER VCR Plus+ DVD FM/AM 5 [Note] DISPLAY OPEN/CLOSE INPUT SELECT TV/VIDEO Press [2] to select "Erase" and press [ENTER]. The program is erased. 1 2 5 8 CANCEL 3 CH Numbered buttons 4 7 6 VOLUME 9 100 SLOW/SEARCH 0 SKIP STOP PAUSE PLAY/x1. 3 The disc's available recording time may not increase after erasing short programs. The available recording time on DVD-R does not increase when you erase programs. DIRECT NAVIGATOR 3, 4, 2, 1 ENTER DIRECT NAVIGATOR PLAY LIST TOP MENU MENU Enter Title [RAM] [DVD-R] Entering text (page 26) ENTER CH SELECT RETURN FUNCTIONS RETURN MIX L1/OPT 2CH FRAME TEST PRO LOGIC CM SKIP TIME SLIP PROG/CHECK ADD/DLT ERASE REC Properties [RAM] [DVD-R] Program information (e. g. , time and date) is shown. Properties Dinosaur No. 1 On 10:00 AM Date 6/20/2002 WED Time 2:15 (SP) Ch 4 ENTER RETURN STATUS MULTI REAR S. POSITION C. FOCUS MARKER F. Rec REC MODE P. MEMORY AUDIO EQ/SFC S W. LEVEL SETUP MUTING SHIFT Common procedures Preparation Release protection before proceeding with "Erase Program", "Enter Title", "Protection", "Shorten Segment" or "Divide Program". [RAM] (Cartridge page 8, disc page 32) Protection [RAM] If set, this will protect the program from accidental erasure. 5 EDITING 1 2 3 Press [DIRECT NAVIGATOR]. Press [3, 4] to select the program. You can also select programs with the numbered buttons. e. g. , "5": [0] [5] Press [2] to set protection and press [ENTER]. The lock symbol appears when the program is writeprotected. DIRECT NAVIGATOR Press [1] so the submenu appears. DIRECT NAVIGATOR 3 No CH 01 4 02 6 03 13 DATE TIME TITLE 6/20 WED 10 : 00 AM Dinosaur 6/20 WED 9 : 00 PM Auto action 6/20 WED 11 : 00 PM USJ EDIT 1 1 1 1 1 No 3 CH 01 02 03 Erase Program TITLE 4 6/20 WED 10 : 00 AM Dinosaur Title Enter 6 6/20 WED 9 : 00 PM Auto action Properties 13 6/20 WED 11 : 00 PM USJ Protection DATE TIME TOTAL 3 Shorten Segment Divide Program SELECT ENTER RETURN EDIT 1 1 1 1 1 Submenu 4 Press [3, 4] to select the item and press [ENTER]. To clear the program list Press [DIRECT NAVIGATOR]. To stop set up process Press [RETURN]. [Note] Once a program is erased, divided, or a segment is shortened, it cannot be restored to it's original state. Once a program is erased or a segment is shortened, the play list which was created from that program is also erased. RQT7061 30 3 TOTAL 3 No 0~9 SELECT ENTER RETURN 3 Shorten Segment [RAM] Divide Program [RAM] Select a point at which to divide the program into two. 5 Press [ENTER] at the start point of the section you want to erase. Shorten Segment N S 5 Press [ENTER] at the point you want to divide the program. Divide Program N S 03 PLAY Start End Next Exit 03 Preview Divide SELECT ENTER RETURN 3 0 : 00 . 01 Exit SELECT ENTER RETURN End ­:­­. ­­ 3 0 : 00 . 01 6 Press [ENTER] at the end point of the section you want to erase. Shorten Segment N S To confirm the division point Press [3, 4] to select "Preview" and press [ENTER]. (Play will begin from a point 10 seconds prior to and after the division point. ) To change the division point Restart play and press [3, 4] to select "Divide", then press [ENTER] at the point you want to change. 03 Start End Next Exit SELECT ENTER RETURN 33 0 : 10 . 15 6 7 [Note] To continue using Shorten Segment 1 Press [3, 4] to select "Next" and press [ENTER], then press [2] to select "Erase" and press [ENTER]. 2 Repeat steps 5 and 6. Press [3, 4] to select "Exit" and press [ENTER]. Press [2] to select "Divide" and press [ENTER]. The program is divided. 3 4 [Note] Press [3, 4] to select "Exit" and press [ENTER]. Press [2] to select "Erase" and press [ENTER]. Segments are erased from the start to end point. You can use basic functions like fast forwarding and slow play (page 18). Play pauses if the end of the program is reached during this procedure. You cannot specify an end point before a start point. You may not be able to specify points within 3 seconds of each other. You cannot specify points on still pictures in the program. The disc's available recording time may not increase after erasing short segments. The divided programs retain the title and CPRM property (page 51) of the original program. [. . . ] A purchase receipt or other proof of date of original purchase is required before warranty service is performed. THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, EXCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES. In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. [. . . ]