User manual PANASONIC SC-HTB50

[. . . ] SC-HTE50 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference. model number suffix "EB" denotes UK model. [. . . ] Refer to the operating instructions for the TV for details. preparation 1 Confirm that the HDMI connection has been made. ( 9, 10) 2 Set the "HDAVI Control" operations on the connected equipment (e. 3 For the optimal "HDAVI Control" operations change the following settings on the connected TV§1. Set the default speaker settings to this system. §2 Set the speaker selection settings to this system. 4 Turn on all "HDAVI Control" compatible equipment and select the TV's input for this system so that the "HDAVI Control" function works properly. 5 If a device is connected to the HDMI IN terminal, start play to check that the picture is displayed on the TV correctly. When the connection or settings are changed, repeat this procedure. §1 The availability and function of the settings may vary depending on the TV. Refer to the operating instructions for the TV for details. §2 If the TV has a default speaker setting within the VIERA Link setting items, choosing this system as the default speaker will automatically change the speaker selection to this system. Speaker control You can select whether audio output is from this system or the TV speakers by using the TV menu settings. When this system is in standby mode, changing the TV speakers to this system in the VIERA Link menu will automatically turn this system on and select TV as the source. You can control the volume setting of this system using the volume or mute button on the TV remote control. If you turn off this system, TV speakers will be automatically activated. Audio will automatically be output from this system if the TV is compatible to VIERA Link "HDAVI Control 4" or later. The volume of this system is set to its minimum. Automatic input switching When the following operations are performed, this system will automatically change the input to the corresponding source. jWhen play starts on an HDMI connected device. §3 jWhen the TV input or the TV channel is changed. §3 If the speaker output setting on the TV is set to this system, the TV and this system turn on automatically (Power on link). [. . . ] Specifications AMPLIFIER SECTION RMS output power 10 % total harmonic distortion Subwoofer ch 110 W per channel (100 Hz, 3 ) Front ch (L, R ch) 65 W per channel (1 kHz, 6 ) Total RMS Dolby Digital mode power 240 W MAIN UNIT GENERAL Power consumption In standby condition Power supply AC 220 to 240 V, 50 Hz Dimensions (WkHkD) 180 mmk408 mmk305 mm Mass 5. 12 W (When the other connected devices are turned off) TERMINAL SECTION HDMI This unit supports "HDAVI Control 5" function. 36 kg k2 pcs SUBWOOFER SECTION 1 way, 1 speaker system (Bass reflex type) Woofer 16 cm cone typek1 1 Specifications are subject to change without notice. 22 VQT4E88 Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. [. . . ]