User manual PANASONIC SC-MAX7000E

[. . . ] SC-MAX7000 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference. Book Page 2 Tuesday, April 19, 2016 1:12 PM Your system and the illustrations can look differently. [. . . ] €¢ The sequence of album may change after the recording. €¢ The recordings are kept in a folder named “REC_DATA” in the USB device or the internal memory. • USB status indicator blinks in red during USB recording. 1 2 3 Put in the disc you want to record. Note: • If you cannot record at high-speed because of the condition of the disc, record at normal speed. €¢ The sound is muted during high-speed recording. –ˆ Adding track marks When recording from radio or external equipment, you can divide tracks using various modes. Before recording Press [REC MODE] to select the mode. Press [OK] during recording to add a track mark. Recording starts automatically when the other equipment starts to play. Recording pauses when it detects silence for 3 seconds. a track is automatically divided at 5-minute intervals. Basic recording 1 Select the source you want to record. Record all tracks Record a specified track Select “OFF PLAYMODE” (Z“Play menu”). The name of the folder that keeps the recording is shown. Note: • During recording, if you press [OK] or pause recording while using “TIME MARK” mode, the 5-minute counter is reset. €¢ You cannot add track marks manually in “SYNCHRO” mode. 14 14 RQT0A73 offset printing MAX7000_E_en MAX7000E_RQT0A73-R. Book Page 15 Tuesday, April 19, 2016 1:12 PM Recording MP3 tracks You can record MP3 tracks from: • MP3 disc to USB B or internal memory • USB A to USB B or internal memory • USB B to internal memory or vice versa Sound effects Preset EQ 1 Prepare the source you want to record. Press [R, T] to select the desired preset EQ setting and then press [OK]. Or turn [MULTI CONTROL] to select the desired preset EQ setting. Recording stops at the last fully recorded track in the album. [. . . ] While you press and hold [1] on the main unit, connect the AC mains lead again. Continue to press and hold the button until “– – – – – – – – –” is shown. All the settings are set back to the factory preset. It is necessary to set the memory items again. [. . . ]