User manual PANASONIC SC-MC07E

[. . . ] SC-MC07 English Deutsch Français Italiano Español Operating Instructions Bedienungsanleitung Mode d’emploi Istruzioni per l’uso Instrucciones de funcionamiento Betjeningsvejledning Gebruiksaanwijzing Bruksanvisning Käyttöohjeet Instruções de Funcionamento 使用说明书 Dansk Nederlands Svenska Suomi Português 中文 ‫ﺍﻟﻌﺮﺑﻴﺔ‬ ‫ﺗﻌﻠﻴﻤﺎﺕ ﺍﻟﺘﺸﻐﻴﻞ‬ E VQT4E49 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference. Safety precautions WARNING To reduce the risk of fire, electric shock or product damage, • Do not expose this unit to rain, moisture, dripping or splashing. [. . . ] Read the operating instructions of the device for details. • Sound may be disrupted if signals are blocked. When you hold this unit, do not fully cover this unit with your palm, etc. • The device is out of the 10 m communication range. (See page 9) • Remove any obstacle between this unit and the device. (See page 6, Switching transmission) • If the indicator lights up red, please replace the batteries. (See page 4) When you turn on the unit, audio is not output and the indicator blinks alternately in red and blue. Disconnect the USB cable from the speaker and remove the batteries. After waiting for a few moments, reconnect the USB cable or reinsert the batteries and turn on the power. If the problem continues, contact the dealer. When the following situations occur, refer to the instructions below to reset the memory: – There is no response when buttons are pressed. – You want to clear and reset the memory. 1 Press [Í/I] to turn the power on. 2 Press and hold [Í/I] for about 10 seconds until the indicator turns off. • All the settings are set back to the factory preset. • The pairing device information will have been deleted by the reset, so it will be necessary to perform pairing again. Delete the pairing information for this unit from the Bluetooth® device, then perform the pairing operation again. 4 hours (Panasonic alkaline battery LR6 Type) Note • Specifications are subject to change without notice. 5 mW) Supported profiles: A2DP Frequency band: 2402 - 2480 MHz (Adaptive Frequency Hopping) Driving distance: 10 m Line of Sight (iPhone 4, at height 1 m, in “MODE 1”) Product identification marking is located on the bottom of the unit. notes on Speakers • These speakers do not have magnetic shielding. Do not put them near devices easily influenced by magnetism. • When you play at high levels for a long period, it can cause damage to the unit and decrease the life of the unit. [. . . ] 118 VQT4E49 (For Australia) Panasonic Warranty 1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product without charge for parts or labour, if in the opinion of Panasonic, the product is found to be faulty within the warranty period. This warranty only applies to Panasonic products purchased in Australia and sold by Panasonic Australia or its Authorised Distributors or Dealers and only where the products are used and serviced within Australia or it's territories. [. . . ]