User manual PANASONIC SC-NA10EB

[. . . ] 7  4 5 6 Note 8 Power indicator 9 AC IN terminal 10 USB (type A) DC output ports 11 AUX jack • Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. Přepínač pohotovostního režimu/zapnutí [Í/I] • When using these ports, use a USB (type A) cable (not supplied). 1 9 10 5 8 11 • When using the AUX input, the Bluetooth and NFC features are not available. [. . . ] € Note that home or pick-up/delivery service is available for the following products in the major metropolitan areas of Australia or the normal operating areas of the nearest Authorised Service Centres: Plasma/LCD televisions / displays (screen size greater than 103 cm) Podłączanie innego urządzenia • Jeżeli przyłożysz inne urządzenie do urządzenia głównego, połączenie Bluetooth zostanie zaktualizowane. Deaktivace některých funkcí NFC tohoto zařízení 4 Start playing back music, a movie, etc. ® Connecting to another device • If you touch another device to this unit, you can update the Bluetooth® connection. Deaktivace (platí pro funkce automatického zapnutí, párování zařízení a zrušení připojení): 1 Disabling some of the NFC functions of this unit 1 This operation prevents unintended use of the One-Touch Connection. Perform the step below while this unit is turned on. Disabling (Automatic power-on, device pairing and connection cancellation are disabled): 1 • Only a connection with a paired device while this unit is turned on remains possible. € This operation automatically turns off the Bluetooth® Standby function. Enabling all the functions again: Refer to “Reset (To the factory preset state)” (back side) • This unit returns to the factory preset state by resetting it. While pressing and holding [- VOL], press and hold [VOL +] until the Bluetooth® indicator and the “D. Selecting Transmission mode setting This unit has two transmission modes: “Connectivity Priority MODE” and “Sound Quality Priority MODE”. After confirming that audio can be played back, select the mode while this unit is turned on. Customers can download a copy of the original DoC to our R&TTE products from our DoC server: http://www. (Category 3) About the DC output ports (USB) The DC output ports of this unit (both ports) are for supplying/charging power to a connected device (rated value: 5 V/1. The two ports can supply/charge power simultaneously. Note that the ports cannot be used for purposes other than supplying/charging power. Power can be supplied even when this unit is turned off. note • A cable compatible with your device is required. If a cable is supplied with your device, use the cable. € Even if you connect a cable compatible with the DC output ports of this unit, your device may not be charged. In that case, use a charger supplied with your device. € Depending on your device, charging methods other than the specified one may not be allowed. Check the operating instructions of your device before use. [. . . ] € Do not pull, bend, or place heavy items on the lead. € Do not handle the plug with wet hands. € Hold onto the mains plug body when disconnecting the plug. • Do not use a damaged mains plug or socket outlet. [. . . ]