User manual PANASONIC SC-PM07

[. . . ] For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference. Operations in these instructions are described mainly with the remote control, but you can perform the operations on the main unit if the controls are the same. [. . . ] § "AUX" or "D-IN" ("DIGITAL IN") works depending on the "TV AUDIO" setting ( above, Setting the TV audio for VIERA Link "HDAVI Control"). You can select whether audio is output from this unit's speakers or the TV speakers by using the TV menu settings. for details , refer to the operating instructions of your TV. Home Cinema This unit's speakers are active. When this unit is in standby mode, changing the TV speakers to this unit's speakers in the TV menu will automatically turn this unit on and select "AUX"§ or "D-IN"§ as the source. the TV speakers are automatically muted. You can control the volume setting using the volume or mute button on the TV's remote control. (The volume level is displayed on the main unit's FL display. ) To cancel muting, you can also use this unit's remote control ( 12). If you turn off this unit, TV speakers will be automatically activated. ­ This function works only when "DVD/CD", "USB", "AUX"§ or "D-IN"§ is selected as the source on this unit. If this occurs, turn the sound effects off. Preparation To display the picture, turn on the TV and select the appropriate video input mode. "ÎPLII" lights when there is effect. This does not work when audio is output from HDMI AV OUT terminal. You can adjust the volume of the surround speakers to get the best surround effect ( 29, Adjusting the speaker level). Except [DivX] You can enhance the surround effect for low volume 5. Each time you press the button: EQ: Equalizer R. (press and hold) "(( ))" lights when there is effect. Each time you press and hold the button: WHISPER-MODE SRD ON You can select sound quality settings. Each time you press [3, 4]: HEAVY: Adds punch to rock. The unit automatically selects the most suitable setting according to the type of playback source. [. . . ] Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the unit's service life. This can overload the unit and cause a fire. Check the source carefully when setting the unit up on a ship or other places where DC is used. [. . . ]