User manual PANASONIC SC-PM10GN

[. . . ] CD Stereo System Operating Instructions Model No. SC-PM10 Note: "EB" on the packaging indicates the United Kingdom. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. E EB GN GCS RQT6682-2B Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. [. . . ] Automatic presetting: All the stations the tuner can receive are preset. Manual presetting: You can select the stations to preset and the order they are preset in. Up to 15 stations each can be set in the FM and AM bands. Preparation: Press [TUNER/BAND] to select "FM" or "AM". A Automatic presetting Do the following once each for FM and AM. Preparation: Tune to the frequency where presetting is to begin (\ page 10). The tuner presets all the stations it can receive into the channels in ascending order. When finished, the last station memorized is tuned in. PROGRAM Manual presetting PROGRAM MHz PROGRAM B SLEEP PROGRAM/ CLEAR 1 [g, REW/ 4] or [f, 3 / FF] tothen to the Press [PROGRAM/­CLEAR] press tune station. 2 required [PROGRAM/­CLEAR]FF] thenselect a Press press [g, REW/ 4] or [f, 3 / to channel. 3 Press [PROGRAM/­CLEAR]. Preset the stations one at a time. The station occupying a channel is erased if another station is preset in that channel. CLOCK TIMER PLAY REC 1 CD PLA PLAY MODE 2 5 8 0 CD 3 6 9 10 4 CD REC MODE 7 1 B Selecting channels Press the numbered buttons to select the channel. 1 TUNER BAND TAPE APE STOP VOL FM MODE TUNE MODE REW VOL FF 2 2 1 SOUND PRESET VIRTUALIZER EQ BASS TREBLE MUTING MU ING DISPLAY DIMMER 1 Press [TUNE MODE] to select " ". 2 Press [g, REW/ 4] or [f, 3 / FF] to OR PROGRAM For channels 1 to 9 press the corresponding number. For channels 10 to 15 press [ 10], then the two digits. 2 select the channel. Allocation setting 1 1 4 7 2 5 8 0 3 6 9 10 Each country allocates broadcast bands according to their particular needs. Preset channel This system can also receive AM broadcasts allocated in 10 kHz steps. To change the step (9kHz 10kHz) Preparation: Press [TUNER/BAND] to select "FM". After a few seconds the display changes to a flashing display of the current minimum frequency. When the minimum frequency changes, release the button. To return to the original step, repeat the above steps. PROGRAM 1 2 2 VOL VOL Note · After changing the "allocation" setting, the frequencies you previously preset in the memory will be cleared. RQT6682 Listening operations PROGRAM/ CLEAR Press and hold [PROGRAM/­CLEAR]. 11 CDs This unit can play CD-DA (digital audio) format audio CD-R and CD-RW that have been finalized (a process that enables CD-R/CD-RW players to play audio CD-R and CD-RW) upon completion of recording. It may not be able to play some CD-R or CD-RW due to the condition of the recording. 1 2 / REW / , / FF / 4 5 3 1 2 3 4 5 Press [y / I] to turn the unit on. y Press [STOP L] to select the CD mode. Every time you press the button: TAPE CD Listening operations 1 2 3 STOP Press [OPEN/CLOSE c] to open the tray, load a CD, and press [OPEN/CLOSE c] to close the tray. Press [CD -/ J] to start play. Plays to the end of the CD and stops. Adjust the volume. To stop the disc Press [STOP L]. Skipping tracks Press [g/REW/ 4] (backward) or [3 /FF/ f] (forward). [. . . ] Total harmonic distortion is measured by the digital spectrum analyzer. Maintenance If the surfaces are dirty To clean this unit, wipe with a soft, dry cloth. · Never use alcohol, paint thinner or benzine to clean this unit. · Before using chemically treated cloth, read the instructions that came with the cloth carefully. For a cleaner crisper sound Clean the heads regularly to assure good quality playback and recording. Use a cleaning tape (not included). RQT6682 Reference Power consumption Dimensions (WxHxD) Mass 48 W 165 x 228 x 313 mm 3. 9 kg Listening operations 23 CAUTION! THIS PRODUCT UTILIZES A LASER. [. . . ]