User manual PANASONIC SC-PM11

[. . . ] Your unit may not look exactly as illustrated. SC-PM11 Table of contents Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Caution for AC mains lead . . . . . . . . . . . . . . . . . . . . Placement of speakers. . . . . . . . . . . . . . . . . . . . . . . . . . Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · Files must have the extension: ". MP3" or ". mp3" · Disc must conform to ISO9660 level 1 or 2 (except for extended formats). · To play in a certain order, prefix the folder and file names with the 3-digit numbers in the order you want to play them. · This unit can access up to 99 tracks. · Choose a CD with this mark: RQTV0179 Using DualDiscs The "CD" sides of DualDiscs do not meet the CD-DA standard so it may not be possible to play them on this unit. 9 FM radio Memory preset Up to 20 stations can be set in the FM band. Preparation Press [FM]. PROGRAM Automatic presetting PLAY MODE Numeric buttons Press and hold [PROGRAM] to start presetting. Manual presetting 1 CLEAR Press [PLAY MODE] to select "MANUAL". DAB USB FM FM /4, /¢ ENTER DAB MENU DAB MUTING SECONDARY -DIMMER DISPLAY 2 3 4 5 Press [ /¢] or [ /¢] to tune to the required station. Press numeric buttons to select a channel. The station occupying a channel is erased if another station is preset in that channel. Repeat steps 2 to 4 to preset more stations. Selecting a preset station Manual tuning Press numeric buttons to select the channel. For two-digit channel, press [h10], then the two digits. Press [PLAY MODE] to select "MANUAL". Press [ /4] or [ /¢] to select the frequency of the required station. 1 Press [PLAY MODE] to select "PRESET". 2 " ST " is displayed when a stereo FM broadcast is being received. To tune automatically Press [ /4] or [ /¢] for a moment until the frequency starts changing rapidly. Perform Auto scan to add them to memory. Also, you may need to change the Auto scan range if the new frequency is outside the factory set Auto scan range ( page 14). STATION TUNE You can select stations from the memory created as shown above in alphanumeric order. You can easily select your favorite stations by using presets ( page 12). As shown in the diagram, an ensemble consists of a group of stations which have primary services, they can also have secondary services. This means, for example, that commentary on sports events from different areas can all be broadcast at once. RQTV0179 11 DAB (continued) PROGRAM PLAY MODE Numeric buttons CLEAR 7 CLEAR DAB DAB USB FM ALBUM , ENTER /4, /¢ DAB DAB MUTING SECONDARY -DIMMER DISPLAY ENTER DAB MENU DAB SECONDARY DAB MENU DISPLAY DAB operation DAB Auto Scan Press and hold [PLAY MODE] until "DAB Auto Scan" appears. When a frequency is tuned by Auto scanning on this unit, the ensemble corresponding to the frequency is displayed for approximately 2 seconds. Note 1 Press [DAB] to enter DAB mode. The unit comes on. · When updating memory with Auto scan, preset stations are not erased or changed. · When a frequency cannot be received, the previous memory is restored. · Total stations received is displayed for approximately 2 seconds. Presetting Presetting channel Up to 20 channels can be set. Note "Scan Failed. " appears if no stations are memorized. If this occurs, adjust the antenna and try Auto scanning or change the Auto scan frequency range. ( page 14) 1 2 3 4 Press [ /4] or [ /¢] to select a station. Press the numeric buttons to select a channel. [. . . ] The USB drive format or its contents is/are not compatible with the system ( page 17). The USB host function of this product may not work with some USB devices. USB devices with storage capacity of more than 8 gigabytes may not work in some instances. Large file size or high memory USB flash drive takes longer time to read. [. . . ]