User manual PANASONIC SC-PM18E

[. . . ] CD Stereo System Operating Instructions Model No. SC-PM18 Note: "EB" on the packaging indicates the United Kingdom. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. E EB GN RQT6686-1B Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. [. . . ] Skipping tracks Press [g 4/REW] (backward) or [f 3/FF] (forward). Searching through tracks During play or pause Press and hold [g 4/REW] (backward) or [f 3 /FF] (forward). CD indicator The CD indicator on the display lights whenever the tray is in the playing position whether is it loaded or not. One touch play If the unit is in standby mode and a CD is loaded, press [CD 2/J] or [CD 1] ~ [CD 5]. The unit will come on automatically and play will start. Disc tray Tray number CD indicator 2 CD 1 Track number Elapsed playing time 3 VOLUME A CD selection and care DOWN UP A a With this system, you can only play CDs having this mark. (a) Do not; · use irregularly shaped CDs. (b) · attach extra labels and stickers. · use CDs with labels and stickers that are coming off or with adhesive exuding from under labels and stickers. (c) · attach scratch-proof covers or any other kind of accessory. (Wipe with a soft, dry cloth. ) · use CDs printed with label printers available on the market. To prevent damage b c 12 RQT6686 Always observe the following points. · Set the system on a flat, level surface. Do not set it on top of magazines, inclined surfaces, etc. · Do not move the system while tray is opening/closing, or when loaded. Always unload all CDs before moving the system. · Do not put anything except a CD in the tray. · Do not use cleaning CDs or CDs which are badly warped or cracked. · Do not disconnect the power mains lead from the household mains socket during CD changing operation. CDs Listening to a CD placed in a specific tray STOP , DEMO CD CHECK CD / 4 1 Preparation: Press [CD 2/J] and then [STOP L, ­DEMO]. 23 Selecting the desired tray number and placing a CD in it 1 2 CD CHANGE 1 2 Press [c CD CHANGE]. (Within about 10 seconds) Press [CD 1] ~ [CD 5] to open the tray and insert the CD. CD 1 CD 2 CD 3 CD 4 CD 5 Listening to the CD placed in a specific tray 3 4 Label must face upward. Press [CD 1] ~ [CD 5] to start play. The selected CD is played from the first track to the last track in order. After the last track, the player stops automatically. Adjust the volume. Disc tray Tray number To remove the CD While one CD is playing (except in All-Disc Random play or program play), you can change the CDs in the other trays. Press [c CD CHANGE] again to close the tray. A To check which tray the CD is in (CD CHECK) 3 1 CD 1 CD 2 CD 3 CD 4 CD 5 The CD check feature lets you check whether a 12cm CD is in a tray. If the player is stopped, all trays will open. If a CD is being played, the corresponding tray will not open. Press [CD CHECK] again to close the trays. [. . . ] · Never use alcohol, paint thinner or benzine to clean this unit. · Before using chemically treated cloth, read the instructions that came with the cloth carefully. For a cleaner crisper sound Clean the heads regularly to assure good quality playback and recording. Use a cleaning tape (not included). RQT6686 Timers and others Reference 27 CAUTION! THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. [. . . ]