User manual PANASONIC SC-PM38DB

[. . . ] Operating Instructions CD Stereo System Model No. SC-PM38DB SUPPLIED ACCESSORIES Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts. (Product numbers correct as of February 2009. These may be subject to change. ) Dear customer Thank you for purchasing this product. Before connecting, operating or adjusting this product, please read the instructions completely. [. . . ] The station name changes in alphanumeric order. Station Memory Updating When there is a station name change, or a new station begins broadcasting, the unit memory is automatically updated when: · The previous station name is displayed by selecting "STATION TUNE". · One of the stations already broadcasting on the same frequency with the new station is displayed by selecting "STATION TUNE". Note · Deleting stations that are no longer broadcasting is not automatic. If you want to delete a station, perform Auto scan again and the new memory is created. · When a new frequency begins broadcasting, stations on the new frequency are not automatically added to memory. Perform Auto scan to add them to memory. Also, you may need to change the Auto scan range if the new frequency is outside the factory set Auto scan range ( page 12). 3 DAB Auto scan PLAY MODE STATION TUNE You can select stations from the memory created as shown on page 9 in alphanumeric order. You can easily select your favourite stations by using presets ( page 11). Press and hold [PLAY MODE] until "DAB Auto Scan" appears. When a frequency is tuned by Auto scanning on this unit, the ensemble corresponding to the frequency is displayed for approximately 2 seconds. Note · When updating memory with Auto scan, preset stations are not erased or changed. · When a frequency cannot be received, the previous memory is restored. · Total stations received is displayed for approximately 2 seconds. 10 RQTX0190 DAB (continued) Presetting Presetting channel Up to 20 channels can be set. 1 Press [u/t] or [y/i] to select a station. Press the numeric buttons to select a channel. To preset more stations, press [PLAY MODE] to select "STATION TUNE" and then repeat steps 1 to 3. Turning automatic clock adjustment function on DAB MENU 1 2 Press [DAB MENU] to enter menu mode. Within 10 seconds, press [e, r] to select "AUTO CLOCK ADJ. " and then press [OK]. Note You cannot preset stations when the station is not broadcasting or when you are selecting a secondary service. 3 Within 10 seconds, press [e, r] to select "ON ADJUST" and then press [OK]. Selecting a preset channel 1 2 PLAY MODE Press [PLAY MODE] to select "PRESET TUNE". Press [u/t] or [y/i] or numeric buttons to select a channel. Select "OFF ADJUST" to turn the automatic clock adjustment function off. To exit Press [DAB MENU] again. Listening to the secondary service DAB SECONDARY Checking the DAB signal quality DAB MENU Press the [DAB SECONDARY] to select the secondary service. " " is displayed if there is a secondary service broadcast. The secondary services are selected each time the button is pressed. The primary service is returned to after the last secondary service. Display Press [DISPLAY] to select the display. The information scroll through the display. Each time you press the button: Dynamic label (information about the broadcast) PTY display (program type) Ensemble label (the name of the ensemble) Frequency display To improve reception by adjusting the antenna while monitoring signal quality on the display. [. . . ] This can cause electric shock or malfunction. If this occurs, immediately disconnect the unit from the AC mains supply and contact your dealer. Do not spray insecticides onto or into the unit. They contain flammable gases which can ignite if sprayed into the unit. [. . . ]