User manual PANASONIC SCPM5EG

[. . . ] The illustrations shown may differ from your unit. Region number The player plays DVD-Video marked with labels containing the region number "2" or "ALL". Example 2 ALL 2 3 5 Model number suffix "EB" denotes UK model. [EB] RQTX1198-B QUICK START GUIDE P6­9 System This unit Speaker system Subwoofer Front speakers Center speaker Surround speakers SC-PT90 SA-PT90 SB-HF70 SB-HC70 SB-HS70 SB-HW22 Caution for AC Mains Lead For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. [. . . ] Enhances the contrast for powerful DYNAMIC: images. ZOOM To select zoom sizes NORMAL, AUTO ([DVD-VR] [DVD-V] [VCD] [MPEG4] [DivX]), k2, k4 [JPEG]: during pause TRANSFER MODE If you have chosen "480p"/"576p"/"720p"/"1080p" or "1080i" ("VIDEO FORMAT" in Menu 4 (HDMI)), select the method of conversion for progressive output to suit the type of material. The setting will return to "AUTO" or "AUTO1" when the disc tray is opened, the unit is turned off or another source is selected. When playing PAL discs AUTO: VIDEO: FILM: Automatically detects the film and video content, and appropriately converts it. Select when using "AUTO", and the content is distorted. Select this if the edges of the film content appear jagged or rough when "AUTO" is selected. However, if the video content is distorted as shown in the illustration to the right, then select "AUTO". Automatically detects the film and video content, and appropriately converts it. In addition to "AUTO1", automatically detects film contents with different frame rates and appropriately converts it. Select if the video content is distorted when using "AUTO1" or "AUTO2". Menu 3 (Audio) DIALOGUE ENHANCER To make the dialogue in movies easier to hear [DVD-V] (Dolby Digital, DTS, 3-channel or higher, with the dialogue recorded in the center channel) [DivX] (Dolby Digital, 3-channel or higher, with the dialogue recorded in the center channel) OFF, ON Menu 4 (HDMI) HDMI HDMI STATUS To show HDMI information e. g. HDMI --- INFORMATION CONNECTED STATE AUDIO STREAM MAX CHANNEL VIDEO FORMAT COLOUR SPACE CONNECTED PCM 2ch 720p YCbCr 4:4:4 HD ENHANCER This works when the HDMI connection is being used with "VIDEO PRIORITY" ( 19, HDMI menu) set to "ON". To sharpen the "720p", "1080i" and "1080p" picture quality OFF, 1 (weakest) to 3 (strongest) VIDEO FORMAT This works when the HDMI connection is being used with "VIDEO PRIORITY" ( 19, HDMI menu) set to "ON". Refer to TV audio setting in EASY SETUP ( 9) or "TV AUDIO" in HDMI menu ( 19). Confirm the audio connection to the SCART (AV) terminal (for "AV"), AUX terminal (for "AUX") or HDMI AV OUT terminal (for "ARC") ( 7, 8). Whenever the connection or settings are changed, reconfirm the points above. §1 "AV", "AUX" or "ARC" works depending on the TV audio setting ( above, Setting the TV audio for VIERA Link "HDAVI Control"). What you can do with "HDAVI Control" Auto lip sync (Available when using VIERA Link "HDAVI Control" with "HDAVI Control 3 or later" compatible TV) This function automatically provides synchronised audio and video output. (This works only when the source is "DVD/CD", "AV"§1, "AUX"§1 or "ARC"§1. ) When using "DVD/CD" as the source, set "TIME DELAY" in VIDEO menu to "0 ms/AUTO" ( 18). RQTX1198 One touch play You can turn on this unit and the TV, and start playing the disc with a single press of a button. During standby mode, press [1 PLAY] to start disc playback. This unit's speakers will be automatically activated ( 17). [Note] Playback may not be immediately displayed on the TV. If you miss the beginning portion of playback, press [SKIP:] or [SEARCH6] to go back to where playback started. Auto input switching (Power on link) When the following operations are performed, the TV will automatically switch the input channel and display the corresponding action. [. . . ] These conditions can damage the cabinet and other components, thereby shortening the unit's service life. Voltage Do not use high voltage power sources. This can overload the unit and cause a fire. Check the source carefully when setting the unit up on a ship or other places where DC is used. [. . . ]