User manual PANASONIC SC-PMX3DB

[. . . ] Operating Instructions CD Stereo System Model No. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference. Note: "EB" on the packaging indicates the United Kingdom. SC-PMX3DB Operations in these instructions are described using remote control, but you can do the operations with the main unit if the controls are the same. Your unit may not look exactly as illustrated. Table of contents SUPPLIED ACCESSORIES Please check and identify the supplied accessories. [. . . ] The station name changes in alphanumeric order. DAB reception method on this unit Depending on the region there is a difference between broadcast frequency and stations broadcast along the same frequency. For this reason, a memory of receivable stations should first be created and then select from those memorised stations as the reception method. DAB Auto Scan This function searches for currently receivable stations and inputs them into unit memory. When DAB is selected for the first time, this function starts automatically. Note Even if the station is stored into memory, some stations may not broadcast depending on the time of day etc. If this occurs, "NO SERVICE" is displayed. Station Memory Updating When there is a station name change, or a new station begins broadcasting, the unit memory is automatically updated when: · The previous station name is displayed by selecting "STATION". · One of the stations already broadcasting on the same frequency with the new station is displayed by selecting "STATION". DAB Auto Scan Press and hold [PLAY MODE] until "DAB AUTO SCAN" appears. When a frequency is tuned by Auto scanning on this unit, the ensemble corresponding to the frequency is displayed for approximately 2 seconds. Note · When updating memory with Auto scan, preset stations are not erased or changed. · When a frequency cannot be received, the previous memory is restored. · Total stations received is displayed for approximately 2 seconds. 10 RQTV0273 Presetting Presetting channel Up to 20 channels can be set. Turning automatic clock adjustment function on To adjust the time information during DAB broadcasting and automatic time adjustment. 1 2 3 4 Press [4/ ] or [¢/ ] to select a station. Press the numeric buttons to select a channel. To preset more stations, press [PLAY MODE] to select "STATION" and then repeat steps 1 to 3. 1 2 Press [DAB MENU] to enter menu mode. Within 10 seconds, press [3/4, ALBUM] to select "CLOCK ADJ. " and then press [OK]. Note You cannot preset stations when the station is not broadcasting or when you are selecting a secondary service. 3 Within 10 seconds, press [3/4, ALBUM] to select "ADJ ON" and then press [OK]. Selecting a preset channel 1 2 Press [PLAY MODE] to select "PRESET". Press [4/ ] or [¢/ ] or numeric buttons to select a channel. Select "ADJ OFF" to turn the automatic clock adjustment function off. To exit Press [DAB MENU] again. Listening to the secondary service Press the [DAB SECONDARY] to select the secondary service. " is displayed if there is a secondary service broadcast. " The secondary services are selected each time the button is pressed. The primary service is returned to after the last secondary service. Checking the DAB signal quality To improve reception by adjusting the antenna while monitoring signal quality on the display. Display Press [DISPLAY] to select the display. Each time you press the button: 1 Press [DAB MENU] to enter menu mode. [. . . ] If this does not fix the problem, consult the dealer. This service in preset memory is not broadcast or not memorised correctly. Please try Auto scanning and perform the presetting channel steps ( page 10 and 11). "MMM F26" or "MMM F56" "*****" and "NO SIGNAL" 18 RQTV0273 Others The picture on the TV disappears or stripes appear on the screen. The location and direction of the antenna are incorrect. [. . . ]