User manual PANASONIC SDRH100EC

[. . . ] The socket outlet shall be installed near the equipment and easily accessible. The mains plug of the power supply cord shall remain readily operable. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from AC receptacle. Warning Risk of fire, explosion and burns. Do not disassemble, heat above 60 xC or incinerate. EMC Electric and magnetic compatibility This symbol (CE) is located on the rating plate. [. . . ] During normal playback, image movement may not look smooth. VQT3H99 57 Recording with manual focus If auto focusing is difficult due to the conditions, then use manual focus. ¬ Change the mode to . Press the iA/MANUAL button to switch to manual mode (l 55) 1 (When MF assist function is used) Select the menu. (l 23) [RECORD SETUP] # [MF ASSIST] # [ON] 2 3 Use the joystick to select [MF] Adjust the focus by selecting or with the joystick. :To focus on a close subject :To focus on a faraway subject MNL 5/5 NEXT A Part displayed in blue The in-focus area is displayed in blue. The normal screen returns approximately 2 seconds after you finish bringing the subject into focus. When [MF ASSIST] is set to [OFF], the blue area is not displayed. To return to auto focus, either switch to [AF] as in step 2, or repress the iA/ MANUAL button. The blue display does not appear in the motion picture that is actually recorded. 58 VQT3H99 Playback Playback 1 Motion picture playback 1 2 Change the mode to . SDR-T70 Use the joystick to select the play mode select icon A, then press the centre of the joystick. Select [SD CARD]/[BuiltinMemory] and [VIDEO], then press the centre of the joystick. 3 SDR-S70 Select [VIDEO], then press the centre of the joystick. SDRH100EC Select [SD CARD]/[HDD] and [VIDEO], then press the centre of the joystick. Select [ENTER], then press the centre of the joystick. Press the MENU button to cancel the setting. VQT3H99 59 4 Select the scene to be played back, then press the joystick. Change the thumbnail display Pressing the zoom lever to the or side as in step 4 will cause the thumbnail display to change in the order shown below. 20 scenes () 9 scenes () 1 scene () Time frame index (l 62) The operation icon will be displayed or hidden each time the centre of the joystick is pressed. Next (previous) page can be displayed by selecting / . 5 Select the playback operation with the joystick. 0h00m00s 9 scenes display returns if the power is turned off or the mode is changed. 1/;: 6: 5: : Playback/Pause Rewind playback Fast forward playback Stops the playback and shows the thumbnails. 60 VQT3H99 Speaker volume adjustment Move the volume lever to adjust the speaker volume during playback. Frame-by-frame playback The motion picture is advanced one frame at a time. ( is for reverse frame-by-frame playback) Normal playback is restored when you select . When the frames are advanced one at a time in the reverse direction, they will be shown in intervals of 0. 5 seconds. (The setting of [RESUME PLAY] does not change. ) 64 VQT3H99 Playback Playback 2 Still picture playback 1 2 Change the mode to . SDR-T70 Use the joystick to select the play mode select icon A, then press the centre of the joystick. Select [SD CARD]/[BuiltinMemory] and [PICTURE], then press the centre of the joystick. 3 SDR-S70 Select [PICTURE], then press the centre of the joystick. SDRH100EC Select [SD CARD]/[HDD] and [PICTURE], then press the centre of the joystick. Select [ENTER], then press the centre of the joystick. Press the MENU button to cancel the setting. VQT3H99 65 4 Select the still picture to be played back, then press the joystick. The operation icon will be displayed or hidden each time the centre of the joystick is pressed. Next (previous) page can be displayed by selecting / . Playing back still pictures by date Still pictures recorded on the same day can be played back in succession. 5 Select the playback operation with the joystick. 1 Select the date select icon and press the joystick. 1/;: 2;: ;1: : Slide show (playback of the still pictures in numerical order) start/pause. Stops the playback and shows the thumbnails. A Date select icon 2 3 Select the playback date, then press the joystick. The still pictures recorded on the date selected are displayed as thumbnails. Change the thumbnail display During step 4, the thumbnail display changes in the following order if the zoom lever is operated to side or side. 20 still pictures () 9 still pictures () 1 still picture Select the still picture to be played back and press the joystick. 9 still pictures display returns if the power is turned off or the mode is switched. Still picture compatibility This unit is compliant with the unified standard DCF (Design rule for Camera File system) established by JEITA (Japan Electronics and Information Technology Industries Association). The file format of still pictures supported by this unit is JPEG. (Not all JPEG formatted files will be played back. ) This unit may degrade or not play back still pictures recorded or created on other products and other products may degrade or not play back still pictures recorded on this unit. Playing back of all the still pictures returns if the power is turned off or the mode is changed. Even if still pictures are recorded on the same day, they are grouped separately in the following cases. j When the number of still pictures exceeds 999 is displayed after the date in the list by date for the still pictures created from the motion picture. (l 62) 66 VQT3H99 Changing the playback setting and playing back the slide show 1 Select joystick. and press the 2 Select the desired item and press the joystick. [DATE SETUP]: Select the desired playback date. [SLIDES INTERVAL]: Select the playback time display interval. (When [DATE SETUP] has been selected) Select the desired playback date, then press the centre of the joystick. (When [SLIDES INTERVAL] has been selected) Select the playback interval, then press the centre of the joystick. [SHORT]: Approx. [. . . ] Electrical noise, static electricity or the failure of this unit or the SD card may damage or erase the data stored on the SD card. During long periods of use, it is normal for this unit and the SD card to become slightly warm and is not a malfunction. When the card access lamp is lit, do not: j Remove the SD card j Turn the unit off j Insert and remove the USB cable j Expose the unit to vibrations or shock Cautionary points when handling Do not expose the terminals of the SD card to water, garbage or dust. Do not place SD cards in the following areas: j Areas exposed to direct sunlight, or in high-temperature areas such near heating equipment. [. . . ]