User manual PANASONIC SD-RH20EE

[. . . ] of your Movie Camera may look somewhat different from those shown in the illustrations in these Operating Instructions. Caution for AC mains lead For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse. [. . . ] Up to 50 scenes can be set in succession. The scenes are registered in the playlist in the order that they were selected. After creating a playlist, the order of the scenes in it can be changed with the [MOVE] function. When the confirmation message appears, select [YES], then press the joystick. Creating a new playlist [HDD] ¬ Rotate the mode dial to select . ¬ Select [HDD] in [MEDIA SELECT]. The thumbnail view screen of the created playlist is displayed. 1 Press the MENU button, then select [PLAY SETUP] # To add another scene to the same playlist Select [ADD]. (l 64) To play back a playlist Select the scene to start playback, then press the joystick. LSQT1211 63 LSQT1211(PAL_ENG). book 64 Editing Playing back a playlist [HDD] Editing a playlist [HDD] Editing scenes on a playlist will not affect the original scenes. ¬ Rotate the mode dial to select . ¬ Select [HDD] in [MEDIA SELECT]. 1 Press the MENU button, then select [PLAY SETUP] # [PLAYLIST] # [VIEW LIST] and press the joystick. Adding scenes to playlist ¬ Select playlist playback mode. (l 64, "Playing back a playlist", steps 1 and 2) 1 MENU Press the MENU button, then select [EDIT] # [ADD] # [YES] and press the joystick. 2 Select the playlist to be played back, then press the joystick. MENU 2 Scenes in the selected playlist are displayed as thumbnails. Select the scene to be added, then press the joystick. 3 Select the scene to start playback, then press the joystick. The selected scene is encircled by a red frame. When the joystick is pressed again, the selected scene will be cancelled. Up to 50 scenes can be set in succession. The scenes are added to the playlist in the order that they were selected. If files conforming to DCF standard are deleted, all the data related to the files will be deleted. Locking still picture files The selected file is encircled by a red frame. When the joystick is pressed again, the selected file will be cancelled. Up to 50 files can be set in succession. This is for preventing still picture files from being deleted by mistake. [HDD] [SD] Still picture files can be locked so that they are not deleted by mistake. (However, please be aware that if a medium is formatted, then all the data on the medium will be erased. ) 4 5 (Only when [SELECT] is selected in step 2) Press the button. When the confirmation message appears, select [YES], then press the joystick. ¬ Rotate the mode dial to select . ¬ Select [HDD] or [SD CARD] in [MEDIA SELECT]. (Only when [SELECT] is selected in step 2) To continue deleting other files Repeat steps 3-5. To cancel deleting halfway Press the MENU button. Files are deleted from the last file on the thumbnail display. The files that have already LSQT1211 67 LSQT1211(PAL_ENG). book 68 Editing 1 Press the MENU button, then select [PHOTO SETUP] # [LOCK SET] # [YES] and press the joystick. [DPOF SET] # [SET] and press the joystick. MENU MENU 2 2 Select the file to be protected, then press the joystick. Select the file to be set, then press the joystick. The number of prints set to be in DPOF is displayed. [ ] display appears and the selected file is locked. Press the joystick again to release the lock setting. You can also select multiple files in succession. 3 Move the joystick up or down to select the number of prints, then press the joystick. To complete the settings Press the MENU button. DPOF setting This is for writing the printing data on an SD card. [SD] You can write the data of the still pictures to be printed and the number of prints (DPOF data) onto the SD card. You can select from 0 to 999. (The selected number of pictures can be printed with the printer supporting DPOF. ) To cancel the setting, set the number of prints to [0]. [. . . ] 1) The effective range of automatic white balance adjustment on this unit 2) Blue sky 3) Cloudy sky (rain) 4) TV screen 5) Sunlight 6) White fluorescent lamp 7) Halogen light bulb 8) Incandescent light bulb 9) Sunrise or sunset 10) Candlelight Outside of the effective range of automatic white balance adjustment, the image will become reddish or bluish. Even within the effective range of automatic white balance adjustment, the automatic white balance adjustment may not function properly if there is more than one light source. For light outside the functional automatic white balance adjustment range, use the manual white balance adjustment mode. White balance The images recorded by the unit may become bluish or reddish under the influence of certain light sources. To avoid such phenomena, adjust the white balance. LSQT1211 107 LSQT1211(PAL_ENG). book 108 Others recorded. [. . . ]