User manual PANASONIC SDR-H50

[. . . ] Operating Instructions Instrukcja obslugi SD Card/Hard Disk Video Camera Model No. SDR-H60 SDR-H50 SDR-H40 Before use, please read these instructions completely. Przed pierwszym wlczeniem kamery prosimy o dokladne przeczytanie instrukcji obslugi. EP LSQT1346 B Information for Your Safety WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION! DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. [. . . ] (Only when [SELECT] is selected in step 3) Select the file to be copied, then press the joystick. The selected file is encircled by a red frame. To unselect the scene, press the joystick again. Up to 50 files can be selected to be copied. The files are copied in the order that they were selected. 5 6 (Only when [SELECT] is selected in step 3) Press the MENU button. When the confirmation message appears Select [YES], then press the joystick. Continued on next page. LSQT1346 65 Function Copying still picture files (Continued) Operating method (Only when [SELECT] is selected in step 3) To continue copying other files Repeat steps 4 to 6. To cancel copying halfway Press the MENU button. To complete editing Press the MENU button. Do not turn off this unit while copying. When you copy files, use a battery with sufficient battery power or use the AC adaptor. Do not open the card slot cover while copying. In case of [ALL], the copying may take time if there are many files. The copied files are recorded after the still picture files in the copy destination. (The file names or the folder names will differ from the original file. ) The lock and DPOF settings of the file cannot be copied. When a still picture is copied to an SD card using a PC or other equipment, it may not show up on the display of the unit. In this case, the image will not be copied to the HDD even if [ALL] is selected. 66 LSQT1346 Media management 1 HDD and SD card management (SDR-H60/SDR-H50) The 60 GB hard drive utilizes a portion of the storage space for formatting, file management and other purposes. (SDR-H40) The 40 GB hard drive utilizes a portion of the storage space for formatting, file management and other purposes. Usable capacity will be less. Formatting HDD [HDD] This is for initializing HDD. Please be aware that if the HDD is formatted, then all the data recorded on the HDD will be erased. Store important data on a PC, etc. ¬ Rotate the mode dial to select . ¬ Select [HDD] in [MEDIA SELECT]. 1 2 Select the menu. (l 24) [SETUP] # [FORMAT HDD] # [YES] When the confirmation message appears Formatting an SD card [SD] This is for initializing SD cards. Please be aware that if an SD card is formatted, then all the data recorded on the card will be erased. Store important data on a PC, etc. Select [YES], then press the joystick. When formatting is complete, press the MENU button to exit the message screen. During formatting, do not turn this unit off. [. . . ] Recording a subject behind dirty or dusty window The subject behind the window will not be focused because the focus is on the dirty window. Similarly, when recording something on the opposite side of a road with heavy traffic, a vehicle that happens to pass by may be brought into focus. 5 000K 1) 6) 4 000K 7) 3 000K 8) 2 000K 9) 10) 1 000K The illustration above shows the range over which the auto white balance functions. 1) The effective range of automatic white balance adjustment on this unit 2) Blue sky 3) Cloudy sky (rain) 4) TV screen 5) Sunlight 6) White fluorescent lamp 7) Halogen light bulb 8) Incandescent light bulb 9) Sunrise or sunset 10) Candlelight Outside of the effective range of automatic white balance adjustment, the image will become reddish or bluish. Even within the effective range of automatic white balance adjustment, the automatic white balance adjustment may not function properly if there is more than one light 108 LSQT1346 Recording a subject that is surrounded by objects with glossy surfaces or by highly reflective objects Since whatever is shiny or glistens is brought into focus, it is hard to focus on the subject to be recorded. [. . . ]