User manual PANASONIC SDR-S7

[. . . ] Operating Instructions SD Video Camera Model No. SDR-S7 Before use, please read these instructions completely. Web Site : http://www. panasonic-europe. com EB GN GJ VQT1R13-1 Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic SD Video Camera. Please read these Operating Instructions carefully and keep them handy for future reference. Please note that the actual controls and components, menu items, etc. of your SD Video Camera may look somewhat different from those shown in the illustrations in these Operating Instructions. Caution for AC mains lead (For United Kingdom) For your safety, please read the following text carefully. [. . . ] End setting. Up to 999 still pictures can be selected by repeating steps and . You cannot add the recording date to pictures for printing. DPOF settings made on other devices may not be recognised. Make settings with this unit. VQT1R13 53 With other products 1 Playback on TV Motion pictures and still pictures recorded with this unit can be viewed on TV. For TV settings, see the operating instructions of the TV. Connect the unit and AC adaptor (P. 14) and set the mode dial to [ Connect the unit and TV with the AV cable (supplied). VIDEO IN ] or [ ]. Insert the plugs as far as they will go. AUDIO IN If your TV is not equipped with AV Input Sockets, the 21-pin Adaptor (optional) is necessary. Consult your dealer. Change the input mode on the TV. Play back motion pictures or still pictures from the unit. (P. 46, 49) To display LCD monitor information on TV [SETUP][EXT. DISPLAY][ON] · To not display the date, time and icons (P. 22, 26) Do not use any other AV cables except the supplied one. If images or audio are not output, check the following: · That the plugs on the AV cable are inserted into terminal as far as they can go · That the plugs on the AV cable are connected to the correct terminals · That input settings and the selected input channel of the TV are correct If pictures are not displayed correctly on a wide-screen TV, adjust the display settings of the TV. If the image stretched in the vertical direction on TVs of a 4:3 aspect ratio [SETUP][TV ASPECT][4:3] 54 VQT1R13 With other products 2 Copying to video recorders or DVD recorders Motion pictures recorded with this unit can be copied to TV video recorders and DVD recorders (hereinafter referred to as "recorder"). For recorders settings, see the operating instructions of the recorders. Copying pictures using the AV cable (supplied) Connect the unit and AC adaptor (P. 14) and set the mode dial to [ Connect the unit and recorder with the AV cable (supplied). VIDEO IN ]. Insert the plugs as far as they will go. AUDIO IN If your TV is not equipped with AV Input Sockets, the 21-pin Adaptor (optional) is necessary. Consult your dealer. Change the input mode on the TV and recorder. Play back motion pictures from the unit (P. 46) and start recording on the recorder. After ending recording on the recorder, stop playback from the unit. Do not use any other AV cables except the supplied one. When copied motion pictures are played back on a wide-screen TV, the image may be stretched in the vertical direction. In such case, see the operating instructions of the recorder. Also, see the operating instructions of the widescreen TV and set aspect ratio to 16:9 (full). Copying (dubbing) pictures using DVD recorders with SD card slot By inserting SD cards recorded on this unit into DVD recorders with an SD card slot, pictures can be copied onto hard disk drives and DVDs. After turning off the unit, eject the recorded SD card. (P. 17) Insert the SD card into the SD card slot of the DVD recorder. [. . . ] Avoid sharp changes in temperature and humidity. Condensation may adhere in the following cases: · After summer rain showers or in humid places where the air is thick with steam · When heaters are turned on in cold rooms · When moving from cold places to warm places · When the unit is directly exposed to cold drafts (i. e. , air-conditioners, etc. ) In the event of differences in temperature or humidity, place the unit in a plastic bag, remove as much air as possible, seal and let it sit for about 1 hour to adjust to the ambient temperature. If the lens fogs up, remove the battery and disconnect the AC adaptor, open the card/battery door and let it sit for about 1 hour to adjust to the ambient temperature. Cleaning Remove the battery and disconnect the AC adaptor. Do not use benzene, thinner, alcohol, etc. [. . . ]