User manual PANASONIC SD-RSW21

[. . . ] Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC. By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. [. . . ] For TV settings, see the operating instructions of the TV. Connect the unit and AC adaptor (P. 16) and set the mode dial to [ Connect the unit and TV with the AV cable (supplied). VIDEO IN AUDIO IN ] or [ ]. Motion pictures recorded with this unit can be copied to TV video recorders and DVD recorders (hereinafter referred to as "recorder"). For recorders settings, see the operating instructions for the recorders. Copying pictures using the AV cable (supplied) Connect the unit and AC adaptor (P. 16) and set the mode dial to [ Connect the unit and recorder with the AV cable (supplied). VIDEO IN AUDIO IN ]. Insert the plugs as far as they will go. If your TV is not equipped with AV Input Sockets, the 21-pin Adaptor (optional) is necessary. Insert the plugs as far as they will go. Change the input mode on the TV. Play back motion pictures or still pictures from the unit. DISPLAY][ON] · To not display the date, time and other icons see P. 24, 28. Change the input mode on the TV and recorder. If your recorder is not equipped with AV Input Sockets, the 21-pin Adaptor (optional) is necessary. Consult your dealer. To display LCD monitor information on TV Play back motion pictures from the unit (P. 50) and start recording on the recorder. After ending recording on the recorder, stop playback on the unit. Do not use any other AV cables except the supplied one. When copied motion pictures are played back on a wide-screen TV, the image may be stretched in the vertical direction. In such cases, see the operating instructions of the recorder. Also, see the operating instructions for the widescreen TV and set aspect ratio to 16:9 (full). Copying (dubbing) pictures using DVD recorders with SD card slot By inserting SD cards recorded on this unit into DVD recorders with an SD card slot, pictures can be copied onto hard disk drives and DVDs. Do not use any other AV cables except the supplied one. If images or audio are not output, check the following: · That the plugs on the AV cable are inserted into terminal as far as they can go · That the plugs on the AV cable are connected to the correct terminals · That input settings and the selected input channel of the TV are correct If pictures are not displayed correctly on a wide-screen TV, adjust the display settings of the TV. If the image is stretched in the vertical direction on the TV using a 4:3 aspect ratio [SETUP][TV ASPECT][4:3] After turning off the unit, eject the recorded SD card. (P. 19) Insert the SD card into the SD card slot of the DVD recorder. For details, see the operating instructions of the DVD recorder. The video format is converted when motion pictures recorded with this unit are copied onto hard disk drives or DVDs. The converted motion picture cannot be copied at high speed onto DVD-R discs. Moreover, motion pictures that are copied back onto SD cards using a computer or other device do not play back on this unit. VQT2A30 58 VQT2A30 59 With other products 3 Printing pictures from PictBridge printers Still pictures recorded with this unit can be printed by connecting the unit directly to a printer that supports PictBridge. Connect the unit and AC adaptor (P. 16), and set the mode dial to a setting other than [OFF]. [. . . ] (Panasonic test methodology) Drop height: 1. 2 m, drop surface: 5 cm thick plywood panel (lauan), drop orientation: (5 units (maximum)) total 26 orientations, including sides, edges, and corners, drop count: 1 drop test for each orientation, final judgment criteria: examination of electrical and mechanical performance based on product specifications without any consideration given to cases of external deformation, such as paint peeling, at impact points. Condensation If condensation adheres to the unit, the lens may fog and the unit and SD card may not function properly. Avoid sharp changes in temperature and humidity. Condensation may adhere in the following cases: · After summer rain showers or in humid places where the air is thick with steam · When heaters are turned on in cold rooms · When moving from cold places to warm places · When the unit is directly exposed to cold drafts (i. e. , air-conditioners, etc. ) In the event of differences in temperature or humidity, place the unit in a plastic bag, remove as much air as possible, seal and let it sit for about 1 hour to adjust to the ambient temperature. If the lens fogs up, remove the battery and disconnect the AC adaptor, open the card/battery door and let it sit for about 1 hour to adjust to the ambient temperature. 98 VQT2A30 VQT2A30 99 Others 6 Specifications Motion pictures SD Memory Card: 256 MB/512 MB/1 GB/2 GB (FAT12 and FAT16 format corresponding) SDHC Memory Card: 4 GB/6 GB/8 GB/12 GB/16 GB/32 GB (FAT32 format corresponding) 704 x 576 Refer to page 29. [. . . ]