User manual PANASONIC SICX

[. . . ] User Guide Supports ICX and S-ICX Version 4. 5 a Section 750 Key Phone User Guide (International) Version 4. 5 Issued June 2000 The contents of this manual are subject to change without notice and do not constitute a commitment on the part of Matsushita Communication Industrial Co. Every effort has been made to ensure the accuracy of this document. However, due to ongoing product improvements and revisions, Panasonic cannot guarantee the accuracy of printed material after the date of publication, nor can it accept responsibility for errors or omissions. Panasonic will update and revise this document as needed. [. . . ] Pick up the handset or press the ON/OFF key. When you hear the busy tone, enter the Callback Request code (default = 3 (HK/ UK) or 3#). Press the ON/OFF key again and wait for the callback tone. (When the outside line is available, your phone rings and the FF key for the outside line flashes. ) 5. Pick up the handset or press the ON/OFF key. Note: You must respond to the callback tone within 15 seconds. Pick up the handset or press the ON/OFF key. Dial the Callback cancellation code (default = 769 (HK/UK) or 769#). Replace the handset. USING ACCOUNT CODES You can assign account codes (both non-verified account codes and verified ID codes) to clients to help track a variety of information; such as, call dates and times, numbers called, and outside line numbers used. This information is then printed for each account on a System Message Detail Recording (SMDR) (Call Logging) record. Note: An SMDR (Call Logging) printer or external call accounting system is required to collect account code records. Non-verified Account Codes Non-verified account codes are voluntary and do not have to be entered before you make a call. They can also be assigned to both incoming and outgoing calls. You can enter a non-verified account code before making a call or during a call. To enter a non-verified account code before making a call 1. Pick up the handset or press the ON/OFF key. Enter the Account Code code (default = 8#). 50 ICX (International), issued June 2000 ICX-45-750 3. Enter the Account Code (up to 10 digits). Dial 9 (UK/HK) or 0 (Taiwan, Malaysia, Indonesia) or press an FF key that is dedicated to an outside line. To enter a non-verified account code during a call 1. Enter the Account Code (up to 10 digits). Press the # key. Verified Account Codes Verified ID codes are required by extensions that have restrictions on placing outgoing calls (i. e. , a specific code is required to place an outgoing call). To make an outside call that requires an account code 1. [. . . ] · Customised Dial Code - This dial code is customised by the system programmer. Notes: · Fixed dial codes and flexible dial codes require different procedures. Be sure to determine which dial codes your system uses to ensure the use of the appropriate procedure for a specific task. · Default dial codes use the same procedures as flexible dial codes. [. . . ]