User manual PANASONIC SL-1200GLD

[. . . ] Turntable System Operating Instructions Model No. SL-1210M5G SL-1200GLD Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. PP RQT7021-2Y Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. The illustrations and photograph in this manual are of the SL1210M5G model. Supplied accessories Please check and identify the supplied accessories. [. . . ] ·Stylus skipping can be reduced using horizontal weight control for scratch play. ·The tone arm can be finely adjusted in a range of 6 millimeters with the lockable height control. Anti-vibration design with 3 layer cabinet construction and large insulating legs. Pop-up stylus light. ·A blue LED light illuminates the stylus. Preparation of the cartridge 1 Attach a cartridge (not included). Follow the cartridge's instructions to correctly attach it to the head shell. ·Use the included shell weight when using a light cartridge (3. 5 to 6. 5 grams). Stylus weight Screws Head shell Shell weight Lead wire Terminal Cartridge Stylus No. Name Reference page(s) EP record adaptor . Connect the PHONO earth lead and stereo PHONO cables to the amplifier PHONO terminals. Stereo connection cable White (L) Red (R) This unit Amplifier (not included) SIGNAL GND PHONO TUNER ·If the earth lead isn't connected, a hum will be heard from the AC power source. ·You will not have adequate volume or sound quality if connecting to an amplifier that has no PHONO terminals. (L) (R) 2. Connect the AC power supply cord. ·Connect this cord only after all other connections are complete. ·Confirm the wattage of AC outlets on amplifiers and receivers before using them for this unit. This unit consumes 14. 5 W. To household AC outlet 1 1 Earth lead Stereo connection cable 2 5 RQT7021 Connections and installation Connecting to an Audio Mixer (not included) ·Disconnect all units from the power source before making any connections. ·Reconnect the AC power supply cord after all other connections are complete. Unit Unit Installation ·Install the unit on a horizontal surface protected from vibrations. ·Keep this unit as far as possible from speakers. ·Ensure the unit is not exposed to direct sunlight, dust, humidity, and heat from a heating appliance. ·This unit may pick up interference from a radio if there is one nearby. Keep radios as far as possible from this unit. Earth lead Adjusting the height of the insulators Place the unit where it is to be used and adjust the height of the legs to make the unit horizontal. ;; Audio mixer Preparatory adjustments Horizontal balance and stylus pressure 1 Release the tone arm. 1. Remove the stylus cover, taking care not to damage the stylus, then release the arm clamp. Free the tone arm from the arm rest. Arm clamp 3 Turn the stylus pressure control to "0" 1. Return the tone arm to the arm rest and fix it with the arm clamp. Turn the stylus pressure control to "0". Hold the balance weight still while doing this. Balance weight Turn stylus pressure control Center line 2 Adjust horizontal balance 1. Turn the anti-skating control to "0". [. . . ] ·Leave the stylus cover on while handling the head shell to prevent damaging the stylus. Product information For product information or assistance with product operation: In the U. S. A. , contact the Panasonic Customer Call Center at 1800-211-7262, or the website http://www. panasonic. com/contactinfo, or the website (http://www. panasonic. com/support). In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 905-624-5505, or visit the website (www. panasonic. ca), or an authorized Servicentre closest to you. Oiling the center spindle. Apply 2 or 3 drops every 2000 hours of operation. Oil Moving the unit Repackage the unit in the packaging it came in. If you no longer have the packaging, do the following: ·Return the tone arm to the arm rest and tape it in place. [. . . ]