User manual PANASONIC SL-BD20D

[. . . ] For the United Kingdom only: Use the numbers indicated in parentheses when asking for replacements parts. Table of contents Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Caution for AC Mains Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Main features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] ·Through the use of an engineered VCA control, volume can be controlled with very little loss in audio quality using the channel fader or cross fader. ·Reliability improvements have been made to the cross fader through the adoption of optical cross fader circuits and a highly durable 45 mm stroke fader providing smooth operation. Voltage Do not use high voltage power sources. This can overload the unit and cause a fire. Check the source carefully when setting the unit up on a ship or other place where DC is used. AC mains lead protection Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fire or electric shock. Do not pull, bend, or place heavy items on the lead. Grasp the plug firmly when unplugging the lead. Pulling the AC mains lead can cause electric shock. This can cause electric shock. Foreign matter Do not let metal objects fall inside the unit. This can cause electric shock or malfunction. This can cause electric shock or malfunction. , Effector output switch (PRE/POST) . . . . . . . . . . . . . . . . . . . . . . Input-output effect control knob (EFFECT) . . . . . . . . . . Output effect control knob (SEND) Input effect control knob (RETURN) Microphone input control knob (MIC) . . . . . . . . . . . . . . . . . . . ·The mixed left (L) and right (R) signal is output to the effector, and the left (L) and right (R) signal from the effector is input. Headphone (Not included) When listening with headphones ·Turn down the volume using the MONITOR LEVEL control knob before connecting. ·Avoid listening for prolonged periods of time to prevent hearing damage. 7 RQT7231 Connections Input side connections Connect the DJ mixer and various equipment with stereo phono cables, control cables and connection cables (Each sold separately). Connect the AC mains lead after completing all the other connections. Connection to the SH-MZ1200 rear panel PLAYER CONTROL terminal Only the separately sold direct drive digital turntable can be operated. Connecting to control terminals of other manufacturer's products may result in incorrect operation or other equipment problems. Direct drive digital turntable 2 (Not included) CD player 2 (Not included) CD player 1 (Not included) Direct drive digital turntable 1 (Not included) Control cable (Not included) Type: 3. 5 mm stereo Connect for use with the fader start function page 13) ( Control cable (Not included) Type: 3. 5 mm stereo Microphone 2 (Not included) Type: 6. 3 mm monaural Rear panel Microphone 1 (Not included) AC mains lead (Included) Connection cable (Not included) Type: RCA coaxial Direct drive digital turntable (Not included) Household mains socket Connection cable (Not included) Type: RCA coaxial Direct drive digital turntable (Not included) Grounding wire Cassette deck (Not included) Turntable 3 (Not included) Turntable 2 (Not included) Turntable 1 (Not included) For the United Kingdom: BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 3 BEFORE CONNECTION. Note It is not necessary to connect a grounding wire if there is no grounding terminal or grounding wire on the turntable. 8 RQT7231 Mixing (Basic operations) 5 Use the channel fader to adjust the volume Select the CH2-CH4 source and adjust volume and sound (Same as instructions 3 - 5 indicated on the left) 6 When using the cross fader Turn [ASSIGN A] and [ASSIGN B] to select the input channel to assign and ·Select different input channels using the ASSIGN A and ASSIGN B switches. If the same input channel is selected by both switches, the volume will remain unchanged even when the cross fader is operated. ·The channel selected with ASSIGN A is assigned to , the channel selected with ASSIGN B is assigned to . Unassigned channels are not output through the cross fader. [. . . ] The volume is low. Check Has the power plug been disconnected?Has the input switch been set to another source?Have any of the units been wrongly connected?Is the master level control or other volume level controls at the MIN position? [. . . ]